TROUBLESHOOTING
Problem | Solution | ||
|
|
| |
| 1. | Place container properly on the base. | |
| 2. | Check to ensure controls are clean | |
|
| and moving freely. | |
| 3. | ||
1. Blender fails to start |
| securely plugged into the electric outlet. | |
4. | Check to see if the circuit breaker has | ||
| |||
|
| tripped or if the fuse for the electric | |
|
| outlet has blown. | |
|
|
| |
2. Stopped | 1. | Unplug blender and wait 5 minutes. | |
2. Plug the blender back in and resume | |||
|
| operation. | |
|
|
| |
| 1. | Container is too full. | |
| 2. | Cutter unit blades are not sharp | |
|
| enough or are damaged. | |
| 3. | Solid pieces are bigger than 1" | |
3. Ingredients do not mix properly |
| (25mm) cubes. | |
4. Check the speed to create a fluid | |||
|
| blend. | |
| 5. | Check to see if enough liquid has | |
|
| been added to the ingredients. Mixture | |
|
| should be fluid and | |
|
| times. | |
|
|
| |
MAINTENANCE
Inspect the blender and its various parts and replace as follows:
Daily
Weekly
Quarterly
1.Unplug the blender and remove the container from the base.
2.Inspect the container blades for wear, nicks, and broken or loose blades. Replace if necessary.
1.Unplug the blender.
2.Inspect the power cord insulation and power plug for cracks. Refer to "Technical Service" for repair or replacement.
1.Review the condition of the container assembly and Mushroom Clutch Set at least every 90 days.
2.Replace if necessary.
Replacement Parts
For replacement parts, call toll free: #
11