Keurig V700 manual Setting the Time & Temperature, Option, Setting the Clock

SECTION 3

Using Your Brewer

SECTION 4

Setting the Time & Temperature

	Adding Water
Please Add
PleaseWaterAdd	When the water supply is low, the Touchscreen will display
Water
	as pictured and the Water Reservoir light will flash.
	Bottled or filtered water is recommended.
	When brewing at sizes larger than 12 oz., if the Brewer senses the
	water level is low, the brewing process will stop until the Water
	Reservoir is refilled. Once enough water has been added, the
	brewing process will resume.
	Do not remove the Water Reservoir during the brewing process.
	There are three options for filling the Water Reservoir:

Option 1

Remove the Water Reservoir Lid and pour water directly into the Water Reservoir. Replace the Lid.

Option 2

Instead of removing the Water Reservoir Lid, you can lift the Flip Top. Pour water into the Water Reservoir. Lower the Flip Top.

Option 3

You may also remove the Water Reservoir from the Brewer to fill it. Replace the Lid and return the filled Water Reservoir to the Brewer.

Do not remove the Water Reservoir during the brewing process.

Setting the Clock

When the Brewer is first turned on, the clock will appear on the Touchscreen. Follow the steps below to set the time.

You must set the clock if you will be using the Auto On/Off feature.

Step 1

Select the settings icon  on the Touchscreen, then select “Time” and finally “Clock.”

Step 2

The next screen will allow you to set the clock.

Use the + and - buttons to set the appropriate time. The clock is on a 12h setting and will switch to AM/PM once the 12h mark is passed. You have a choice to display the clock in “Analog” or “Digital” on the Touchscreen.

Step 3

Once the time is set, select “ON” to save and you will return to the Time Menu. Select the back arrow

to return to the previous screen.

Lift to Brew

Settings

Time

Temperature

Time

Clock

Auto On

Auto Off

Energy Saver

Set Clock to:

0:00AM

+	+
H	M
–	–
Analog	Digital

ON OFF

16 17