![](/images/new-backgrounds/1233371/233371149x1.webp)
| Table AA. Relay Settings |
|
| |
|
|
|
| |
Setting | Description |
| Default Setting | |
|
|
|
| |
| Displays the number (default) or name of the relay. The entry highlighted in this box is |
|
| |
| directly associated with the physical output number displayed in Physical output. By |
|
| |
| default, the relay outputs displayed are numbered |
|
| |
Relays | pane are |
| Select relay | |
displayed in the Modify Alarm area’s Name text box. |
| |||
| Relay array outputs are supported as follows: |
|
| |
| • 4 or 8 channels have two relays |
|
| |
| • 16 channels have four relays |
|
| |
|
|
|
| |
Relay name | Displays the relay number or name. You can modify the entry displayed in this text box. |
| No default | |
| setting | |||
|
|
| ||
|
|
|
| |
Physical output | The number of the physical connector to which the relay out is connected. This number |
| 0 | |
cannot be modified. |
| |||
|
|
| ||
|
|
|
| |
| This list allows you to select the following relay mode options: |
|
| |
| • Off |
|
| |
Mode | • On (default) |
| Off | |
| • Toggle |
|
| |
| • Pulse |
|
| |
|
|
|
| |
Period | Sets the relay period. This setting defines the total time in tenths of a second |
| 5 | |
the relay control pulse. |
| |||
|
|
| ||
|
|
|
| |
On state | Sets the percentage of time during the defined period that the relay will be in the ON |
| 0 | |
state. |
| |||
|
|
| ||
|
|
|
| |
Number of pulses | Sets the number of times |
| 0 | |
the defined period. |
| |||
|
|
| ||
|
|
|
| |
| Table AB. Sequence Monitor Settings (1 of 2) |
|
| |
|
|
| ||
Setting | Description | Default Setting | ||
|
|
|
| |
Default dwell time | Sets the global dwell time (in seconds) that video from each selected camera is | 10 seconds | ||
displayed on the sequence monitor. | ||||
|
|
| ||
|
|
|
| |
Interleave video on alarm | When selected, causes alarm video to be interleaved with normal video displayed on the | Disabled | ||
sequence monitor. | ||||
|
|
| ||
|
|
|
| |
Select cameras to add to sequence |
|
| ||
|
|
|
| |
| Lists available cameras that can be added to the sequence. To add cameras to the |
|
| |
Available Cameras | “Cameras in the sequence” list, select a camera in the Available Cameras list, and then | No default setting | ||
select Add. To remove cameras from the list, select a camera in the “Cameras in the | ||||
|
|
| ||
| Sequence” list, and then select Remove. |
|
| |
|
|
|
| |
Add/Remove | Command buttons that let you add or delete cameras from the “Cameras in the | N/A | ||
sequence” list. | ||||
|
|
| ||
|
|
| ||
Cameras in the sequence | List of cameras that are displayed on the sequence monitor. | No default setting | ||
|
|
|
|
| 75 |