Pelco DVR5100 manual Default, Setting Description, Mode, Maximum VPN Sessions 5 sessions

		Table P. Date and Time Settings
			Default
Setting	Description		Setting
		AM/PM or 24 hours
		• hh: Specifies hours (range is 00–23)	Current time on
	Time format	• mm: Specifies minutes (range is 00–59)
			system clock
		• ss: Specifies seconds (range is 00–59)
Format		For example, 8:30 AM and 40 seconds is expressed as: 08:30:40.
		mm/dd/yyyy or dd/mm/yyyy
		• dd: Represents day of the month (range is 01–31)	Current date on
	Date format	• mm: Represents month of the year (range is 01–12)
			system clock
		• yyyy: Represents the year
		For example, March 30, 2008 can be entered as 03/30/2008.
	Time Zone: Supports all international time zones. Besides providing the correct date and time		America
	stamp for recorded video, selecting a time zone also determines whether or not the location uses
			Los Angeles
	daylight saving time (or summer time in Europe). Select the time zone and the city closest to your
			(GMT - 08:00)
	location to ensure the correct implementation of this feature.
	Time: Time can be typed or selected with the up and down arrows.		N/A
Time & Date
	Date: Date can be typed or selected with the up and down arrows.		N/A
	Time server: The DVR5100 uses the Network Time Protocol (NTP) to synchronize the clocks of all
	the network devices. By default, time and date information is included with video streams and
	other device data. Enter the IP address of the computer acting as the Endura NTP time server.		N/A
	(Contact your system administrator for this information.) Use the EndurAdmin™ interface to set the
	system time on your NTP server. Refer to the Endura EndurAdmin Tool manual (C1675M).
		Table Q. Network Settings (1 of 2)
Setting	Description		Default Setting
	Mode:		Automatic
	• Dynamic Host Configuration Protocol (DHCP): The IP address is assigned automatically.
			Manual
	• Static: The IP address is entered manually.
	IP Address: The “Static network address” text box is available if “Network addressing” is set to		198.168.100.1
Network Addressing	Static. It is unavailable if DHCP is used.
	Subnet Mask: The static “Subnet mask” text box is available if “Network addressing” is set to		255.255.255.0
	Static. It is unavailable if DHCP is used.
	Default Gateway: The “Default Gateway” text box is available if “Network addressing” is set to		198.168.100.1
	Static. It is unavailable if DHCP is used.
	• Limit: When a server using bandwidth throttling reaches the allowed bandwidth set by the		LAN
	administrator, it blocks additional read attempts, usually moving them into a queue to be
Bandwidth throttle	processed once bandwidth use reaches an acceptable level. The options are: LAN, T1, 768 Kbps,
	512 Kbps, 384 Kbps, 256 Kbps, and 128 Kbps.
			5
	• Maximum VPN Sessions: 5 sessions.
	DNS text box. If DHCP is used, you can do one of the following:		No default
DNS server	• Select to obtain a DNS server address automatically.
			setting
	• Specify the preferred DNS server and an alternate DNS server.

C1695M-B (11/08) 69