Pelco DVR5100 USB PC KEYBOARD/MOUSE and Control PAD Functions, Keyboard Control Pad Function

Menu

Plus (+)/Minus (–) buttons

Enter/Shift

Joystick

•DVR5100 remote client: For advanced programming and remote access, use the DVR5100 remote client application. Refer to the DVR5100 Remote Client Operation manual (C1697M) for more information.

NOTE: Directions for configuring and operating the DVR5100 are given for the USB PC keyboard and mouse, as well as the DVR5100 control pad. Throughout this document, the first part of the instructions refer to keyboard and mouse operation, followed by instructions in brackets ([ ]) for control pad operation.

USB PC KEYBOARD/MOUSE AND CONTROL PAD FUNCTIONS

Table H describes the USB PC keyboard/mouse and the DVR5100 front panel controls that are available when you view live or recorded video with no on-screen menus visible. Live video is indicated by a green border, recorded video is indicated by a yellow border, and PTZ mode is indicated by a blue border. Refer to Table I on page 31 for information on the front panel controls for PTZ mode.

Table H. Live and Playback Controls (1 of 2)

	Keyboard	Control Pad	Function
	Right, Left, Up, and	Joystick	Navigates to a different video pane.
	Down Arrows
			Keyboard: Press F5 (single), F6 (2 x 2), F7 (3 x 3), and F8 (4 x 4) to
			change the screen layout. Left-click twice to change to a full-
			screen configuration.
	F5–F8	Change layout	Control pad:
			•	Press “Change layout” to toggle the screen layout from
				single, 2 x 2, 3 x 3, and 4 x 4 display layouts.
			•	Press and hold “Change layout” to jump straight to
				single/full-screen video for the currently selected camera.
			Press plus (+) to display the next camera in the sequence in the
	Plus (+)/Minus (-)	Plus (+)/Minus (-) buttons	currently selected video pane.
			Press minus (-) to display the previous camera in the sequence.
			Keyboard: Type the desired camera number, and then press F9 to
	Numeric keypad + F9	Menu +	jump directly to that camera.
		Blue function + Blue function	Control pad: Opens the Camera Selection dialog so you can
			choose a specific camera without cycling through the sequence.
			• Type O (zero), and then press F9 to disconnect a camera.
	O (zero) + F9	N/A	• Right-click in a video pane (live view mode) for the shortcut menu,
			and then click Disconnect.
			Keyboard: Press < or , (comma) to step backward or > or . (period)
	< or , (comma)	Jog (inner dial)	to step forward.
	> or . (period)		Control pad: Turn the jog counterclockwise to step backward or
			clockwise to step forward.
			Keyboard: Press < or , (comma) for fast rewind, > or . (period) for
	< or , (comma)		fast-forward.
		Shuttle (outer ring)	Control pad: Turn the shuttle counterclockwise for fast rewind or
	> or . (period)
			clockwise for fast-forward. To increase speed, turn the shuttle
			farther in the desired direction.
30				C1695M-B (11/08)