AUDIOSETUP
VIDEOSETUP
SPDIFSetup
SPDIFOutput
Sharpness
Brightness
Contrast
SPDIF/RAW
Choosethis setting, if your DVD player is connected to a
power amplifer with a coaxial cable or an optical cable.
When playing a disc recorded with DTS and MPEG
audio formats, the corresponding digital signals will be
outputfrom the Coaxial Output jack. This player’s digital
output jacks are designed for a connection to a DTS or
MPEGreceiver or decoder.
SPDIF/PCM (Sony-Philips Digital Interface Format/
Pulsecode modulation)
Choosethis setting, if your DVD player is connected to a
2-channel digital stereo amplifier.When playing a disc
recordedwith MPEG audio formats, the audio signal will
beoutput from the Coaxial Output jack or Optical Output
jack.
Choosethis setting to adjust the sharpness of the video
output. High, medium and low are the 3 different
settingsthat can be selected.
Choose the remote control cursors to adjust the
brightnessvalue , which ranges from -20 to +20.
Use the remote control cursors to adjust the contrast
value, which ranged from -16 to +16.
PARENTALCONTROL
NOTE
PASSWORD
0000
DEFAULT
This function limitsthe playback of DVDs based on the
MotionPicture Association of America’srating assigned
to each movie. Parent’s can specify the ratings that
requirea password to view. The rating listed from low to
high, KID SAF is the lowest andADULT is the highest.
To turn off this setting, use the cursor on the remote
control to select the last option (Not shown in the
following).
- When changing the parental lock password,
usethe number buttons to enter the password
andpress ENTER button to confirm.
Thisoption is used to change the password. User must
enterthe old password prior to creating a new one. The
default password is . Remember the new
passwordis highly recommended.
Thisoption is used to reset all functions in this unit back
tothe initial status setting by the factory.
PREFERENCESETUP
INITIAL SETUP
E22
ENGLISH