Epson MFJ-1278B manual Nodepath text string Mode Mailbox Default, Nomode ON/OFF, Nucr ON/OFF

MFJ-1278B MULTI-MODE OPERATIONAL COMMANDS

NODEPATH text string Mode: Mailbox Default:" "

Parameters:

text string; specifying node connect string

Enter the command the TNC will command the node connected by the NODEFORW command to link with the receiving BBS.

Example:

cmd: NODEPATH C KB4VOL

cmd: NODEFORW PSL5

This sequence first connects to the PSL5 node. When connected, the TNC sends the node connect command "C KB4VOL" to establish a link with the receiving bbs, KB4VOL.

NOMODE ON/OFF Mode: Packet Default: OFF

Parameters:

ON The MFJ-1278B will only switch modes (command, converse or transparent) upon explicit command.

OFF The MFJ-1278B will switch modes in accordance with the setting of NEWMODE.

When NOMODE is ON, the MFJ-1278B will never change between CONVERSE or TRANSPARENT mode to COMMAND mode (or vice-versa) on its own. Only user commands (CONV, TRANS, or ^C) may change the type in mode.

If NOMODE is OFF, then automatic mode switching is handled according to the setting of the NEWMODE command.

NUCR ON/OFF Mode: Packet Default: OFF

Parameters:

ON <NULL> characters are sent to the terminal following <CR> characters.

OFF <NULL> characters are not sent to the terminal following <CR> characters.