Epson MFJ-1278B manual Memory Buffers, Radio Port Switching

MFJ-1278B MULTI-MODE BASIC OPERATION

On the CW, MCW and Memory Keyer operation modes, instead of selecting a baud rate you will select CW sending speed by entering a number from 5 thru 99. If you do not select a speed, the MFJ-1278B will use the last speed selected. The default value is 20 WPM.

MODE	OPERATION	DEFAULT	SELECTABLE
CODE	MODE	BAUD RATE	BAUDRATE/SPEED/FORMAT
VP	VHF Packet	1200	300, 1200, 2400*, 9600*
HP	HF Packet	300	300
PT	Pactor	100	100, 200
VB	VHF Baudot RTTY	45	45, 50, 57, 75, 100, 110,150, 200, 300
HB	HF Baudot RTTY	45	45, 50, 57, 75, 100, 110,150, 200, 300
VA	VHF ASCII RTTY	110	45, 50, 57, 75, 100, 110,150, 200, 300
HA	HF ASCII RTTY	110	45, 50, 57, 75, 100, 110,150, 200, 300
AM	AMTOR/NAVTEX	100	100
CW	CW/ Mem. Keyer	20	5 WPM thru 99 WPM
MC	Modulated CW	20	5 WPM thru 99 WPM
FX	FAX(2-level)**	3(120L/M)	60, 90, 120, 180, 240, 360, 480 (LPM)
	FAX(16-level)***
TV	SSTV**	1 (8.5S)	8.5, 12, 17, 24, 36(s)
	Color SSTV***	--------	Robot 72, Scotty 1, 2 Martin 1, 2

Table 4-3: MODE Command Codes and Baud Rates.

*With optional internal modem

**Supported by the built-in printer port: 2-level FAX and 4-level B&W SSTV.

***When using MFJ Multicom terminal program MFJ-1278B will support 16-level FAX and Color SSTV.

Radio Port Switching

The MFJ-1278B provides the user with two independent radio ports, Radio 1 and Radio 2. The MFJ-1278B selects Radio port 1 when first initialized. After receiving the cmd: command prompt, you can select the desired radio port by typing "RAD 1" or "RAD 2" followed by a "Return" key press.

MFJ-1278B will display a new operation status and end with cmd: prompt.

MEMORY BUFFERS

The MFJ-1278B gives you ten user programmable memory buffers. The Memory Buffers are numbered 0 thru 9. These Memory Buffers are accessible by the BUF command. Each memory buffer is capable of storing up to 120 characters, including puncuations. The user