MFJ-1278B MULTI-MODE

OPERATIONAL COMMANDS

BWNL ON/OFF

Mode: AMTOR

Default: OFF

BWNL controls whether the MFJ-1278B in mode B FEC waits for you to send a newline character ( <CR> ) before it starts transmitting the data.

If BWNL is OFF then every character you transmit in mode B will be sent as soon as possible.

If BWNL is ON, the MFJ-1278B will buffer the entire line sending it only when you have completed it, and pressed the RETURN key. This willallowyou to fix typing mistakes before transmission. If the end of the line comes before you finish, then the line is automatically sent.

CALIRA

Mode: All

CALIBRA is an immediate command, and is used to transfer control to the modem calibration routine. Calibration may be performed at any time without altering the current link state.

Briefly, the commands available in the calibration routine are:

<SPACE>

Switches between the Mark and Space transmit audio tones.

D

Alternates between the two transmit tones at a rate determined by the radio baud rate. This will help you to calibrate the demodulator.

K

Activates the modulator and Toggles the PTT line on/off.

Q

Quits the calibration routine, and returns to command mode.

Page 192
Image 192
Epson MFJ-1278B manual Bwnl ON/OFF, Calira, Space