MFJ-1278B MULTI-MODE

BASIC OPERATION

MODULATED CW OPERATION

The MFJ-1278B allows the transmission of CW code practice over a VHF FM radio. To send code practice over a VHF FM radio, the user would use the Modulated CW mode, or MCW. When using the Modulated CW, the MFJ-1278B will key the PTT line of the Radio port and send a keyed audio tone to the microphone input of your radio. Modulated CW can be used on either radio port1 or radio port 2.

You do not have to re-wire the Radio cable when operating Modulated CW. You can use the same cable that you use for the other modes of operation.

To enter MCW mode type:

MODE MC <ENTER>

The MFJ-1278B will respond with the mode status as shown below, followed the cmd: command prompt.

Radio: 1

Terminal: 9600

Mode: Modulated CW, 20

 

cmd:

 

Operation of MCW is the same as in standard CW. Please refer to "CW OPERATION" for further details.

Page 82 Page 84
Page 83
Image 83
Epson MFJ-1278B MULTI-MODE Basic Operation Modulated CW Operation, Mode MC Enter, Radio Terminal Mode Modulated CW Cmd
Page 82 Page 84
Top Page Image Contents