Epson MFJ-1278B manual Blp

MFJ-1278B MULTI-MODE APPENDIX H COMMAND SUMMARY

Command	Paramete	Default	Mode	Function	Page
	r
BKONDEL	ONOFF	on	Packet	Determines the way the screen is updated	6-19
				when a character is deleted in the
				command mode.
BLP	ONOFF	on	Packet	Allows Host Mode operation	6-20
BTEXT	text	blank	Packet	Specifies the text of the beacon packet.	6-21
BUDLIST	ONOFF	off	Packet	Determines if the packets listed in	6-22
				LCALLS are to be displayed.
BUF	n	0-9	CW/RTTY/	Allows addressing of the ten user ASCII	6-22
				programmable memories.
BUFKEY	nnn	9	CW/RTTY/	Allows the user to transmit the ASCII	6-23
				buffer without using the (CTRL-T).
BUFTIME	n	0	CW	Used to transmit buffer 0 when it is a non-	6-23
				zero value at the set interval.
BWNL	ONOFF	off	AMTOR	Causes the MFJ-1278B to transmit when	6-23
				it receives a <CR>.
CALIBRA	--	I-command	All	Used to transfer the control to the modem	6-24
				calibration routine.
CALSET	n	0	All	Specifies the count setting for use by the	6-24
				calibration routing.
CANLINE	n	$18 (^x)	Packet	Changes the cancel-line input editing	6-25
				command character.
CANPAC	n	$19 (^Y)	Packet	Changes the cancel-packet input editing	6-26
				command character.
CBELL	ONOFF	off	Packet	Sends a bell tone through the computer or	6-27
				terminal speaker when a packet
				connection is made.
CBell	ON/OFF	OFF	Pactor	Sends a bell through the computer	6-27
				terminal speaker when a Pactor connect is
				established.
CCITT	ONOFF	on	RTTY	Determines whether U.S. standard or the	6-28
				internationally recognized character set is
				used.
CHANGE	-	I-command	AMTOR	Switches from receiver to transmitter in	6-28
				AMTOR mode A "ARQ".
CHAT	-	I-command	M-Packet	Allows SYSOP to break onto the	6-28
				mailbox's connected link.
CHECK	n	30	Packet	Sets a connection timeout.	6-29
CHECKV1	ONOFF	off	Packet	Enables the automatic idle-link-	6-29
				disconnect feature for AX.25 L2V1
				connections.
CHObell	ON/OFF	on	Pactor	Sends a bell tone to the computer or	6-30
				terminal when a Pactor changeover is
				done.
CHOChar	nnn	25	Pactor	Designates the Pactor changeover	6-30
				character.
CMDchr	nnn	$03	Pactor	Deisgnates the Pactor return to command	6-30
				mode character.