Epson MFJ-1278B FAX Formats, FAXMODEn Lines per Type of Service Minute Second, Faxmode n Enter

MFJ-1278B MULTI-MODE BASIC OPERATION

FAX Formats

The MFJ-1278B lets you receive and transmit FAX. The FAX modulator and demodulator of the MFJ-1278B are pre-set at the factory to allow FAX operations without any recalibration. Recalibration is not needed under normal conditions. The MFJ-1278B will support FAX formats listed in Table 4-6.

FAXMODE(n)	Lines per	Lines per	Type of Service
	Minute	Second
1	60 line/min.	1 line/sec.	Wire Photographs
2	90 line/min.	1.5
		line/sec.
3	120 line/min.	2 line/sec.	Weather FAX
4	240 line/min.	4 line/sec.	Satellite Weather FAX
5	360 line/min.	6 line/sec.
6	480 line/min.	8 line/sec.
7	180 line/min.	3 line/sec.

Table 4-6: MFJ-1278B FAX Formats

You may change the FAX format with the FAXMODE command. From the cmd: command mode prompt, type:

FAXMODE n <ENTER>

Where n is a number from 1 to 7 as listed in the Table 4-6 above.

For example, if you want to change the FAX format to 1 or 60 lines per minute, type: FAXMODE 1 <ENTER>

The MFJ-1278B will be set to receive or transmit Fax picture files in FAX 1 format.

Note: If you are using one of the special terminal programs that supports multi-gray level FAX operation, you should follow the procedure given in its operating instruction manual to receive and transmit FAX.

FAX operation procedure given in this instruction only applies to receiving 2-level FAX and printing it to an EPSON graphic printer attached to the MFJ-1278B printer port.