Epson MFJ-1278B manual This is to Insure Good Contact with Chassis Reduce EMI

MFJ-1278B MULTI-MODE APPENDIX I PARTS LIST

MFJ P/N Descrpition Component ID

806-0210-1278 CABINET COVER.

NOTE: MASK OUT PAINT ON THE INSIDE OF THE TOP CHASSIS PIECE.

THIS IS TO INSURE GOOD CONTACT WITH CHASSIS REDUCE EMI.

770-1162 STICK-ON RUBBER FEET

781-2110 FCC STICKER, INSTALL UNDER CHASSIS

781-1118 SERIAL NO. STICKER. INSTALL ONE UNDER CHASSIC AND ONE ON OUTSIDE OF GIFT BOX.

852-1027 SMALL FORM PACKING INSERT

852-1028 LARGE FORM PACKING INSERT

850-1108 1278B PRINTED GIFT BOX, WITH REVISED ARTWORK FOR REV. 10 PCB.

ADDITION PARTS FOR MFJ-1278BT ONLY

50-2400B-1 2400 BAUD MODEM PCB ASSEMBLY

10-22008 MODEM CONNECTING CABLE ASSEMBLY: 3", 5 PIN CONNECTOR JUMPER CABLE WITH 5 POS. IDC SOCKET ON EACH END.

716-2050 .5" NYLON MOUNTING SPACER

700-3063 6-32 X .25", MACHING SCREW FOR MOUNTING MODEM PCB.

NOTE: FOR MFJ-1278T, BEFORE INSTALLING 50-2400B-1 MODEM PCB ASSEMBLY, REMOVE ALL SHORING JUMPERS ON J4.

BOM for Display PC Assembly: P/N: 50-1274-2

100-0009 470 ohm, 1/4 W, 5% R209, R210