Epson MFJ-1278B manual Dayusa ON/OFF

MFJ-1278B MULTI-MODE	OPERATIONAL COMMANDS
DAYUSA ON/OFF	Mode: Packet	Default: ON
Parameters:

ON Date is displayed in the format mm/dd/yy.

OFF Date is displayed in the format dd-mm-yy.

This command determines the format for the MFJ-1278B's display of the date. If DAYUSA is ON, the standard U.S. format is used; if DAYUSA is OFF, the standard European format is used. This command affects the format of the date display used in "time stamps" as well as the display when DAYTIME is entered without parameters. The format for entering the time using DAYTIME is not affected.

For example, if DAYUSA is ON, then July 2, 1984 at 9:28:44 AM would be displayed as

cmd: DAYTIME 07/02/84 9:28:44

If DAYUSA is OFF the same date and time would appear as

cmd: DAYTIME 02-07-84 9:28:44

DDisc Mode: Pactor Immediate Command

The DDISC command is used as a last resort for terminating a PACTOR link. This will work where at times the standard DISCONNECT will not. The use of this type of termination is considered RUDE so this is why it is a last resort.

Disconnect Mode: Pactor Immediate Command

This command is exactly like the DISCONNECT command in Packet. When this command is issued from the p_cmd: prompt a disconnect sequence is initiated. The DISCONNECT command is what operators normally used to terminate a Pactor link.

DISplay Mode: Pactor Immediate Command

The DISPLAY command will display all PACTOR commands and their settings. This is the