Epson MFJ-1278B Timedcmd text string Mode Mailbox Default, String- max 119 chars, Tinv ON/OFF

MFJ-1278B MULTI-MODE OPERATIONAL COMMANDS

When the MAILBOX is ON, the System Operator can access the mailbox by typing the immediate command, SYSOP. All commands are available to the SYSOP. When the SYSOP has completed operating the MAILBOX, he must return to command mode with "Control-C" (or the current COMMAND character) to allow the remote users access to the

MAILBOX.

TIMEDCMD text string Mode: Mailbox Default:" "

Parameters:

[string- max 119 chars]

This string in the TIMEDCMD parameter is executed as a TNC command whenever the minutes register in the time of day clock equals the value in the TIMEDMIN parameter. The string is executed when seconds equals one; execution is deferred while the user is entering a command.

TIMEDMIN n Mode: Mailbox Default: 60

Parameters:

n0 - 60, specifying 1 minute intervals

The TIMEDMIN parameter is compared against the minutes register of the real time clock to determine when the TIMEDCMD string is sent to the command interpreter. Setting this parameter to 60 disables the feature. Combined with the TIMEDCMD string, the user may configure his TNC to perform hourly automatic forwards and reverse forwards.

TINV ON/OFF Mode: AMTOR Default: OFF

Parameters:

ON Transmit signal is inverted from standard low tone MARK, to high tone MARK.

OFF Transmit signal is standard low tone MARK.

TINV controls whether the MFJ-1278B inverts the transmitted AMTOR signals. It is similar to TXINVERT in RTTY/ASCII modes.