Epson MFJ-1278B manual IDTime nnn

MFJ-1278B MULTI-MODE OPERATIONAL COMMANDS

ID Mode: Packet Immediate Command

ID is an immediate command. It will send a special identification packet. ID can be used to force a final identification packet to be sent as a digipeater station is being taken off the air. The identification packet will be sent only if the digipeater has transmitted since the last automatic identification.

An identification consists of an unsequenced I frame whose data field is your station identification. The identification packet is addressed to the "CQ" address set by the UNPROTO command. Your station identification is your callsign as set by MYCALL, with "/R" appended.

Id Mode: Pactor Immediate Command

The ID command is an immediate command that when used will invoke an immediate CWID to be sent. The ID will be sent at 20 WPM and will consist of the station callsign.

IDTime nnn Mode: Pactor Default: 590

Parameters:

nnn: 6<=nnn<=255

The IDTime parameter specifies the time interval between automatically generated CWID events. The actual time yielded is equal to IDTIME * 10 seconds. The IDTime parameter is relevant only when bit 0 of the CWIDMODE parameter is set to 0. The default IDTime is 590 seconds.

K (Converse) Mode: Pactor Immediate Command

This command will put the MFJ-1278B into CONVERSE mode from the p_cmd:.