Epson MFJ-1278B manual NO200 ON/OFF, Mode Pactor Default OFF, Nodeforw node Mode Mailbox Default

MFJ-1278B MULTI-MODE OPERATIONAL COMMANDS

NO200 ON/OFF Mode: Pactor Default: OFF

Parameters:

ON Inhibits 200 baud operation in Pactor mode.

OFF Allows 200 baud operation in Pactor mode.

The NO200 command controls whether 200 baud links are to be discouraged. The TNC accomplishes this in two ways:

1.Speedups are inhibited.

2.Incoming connect requests are acknowledged for 100 baud.

The NO200 command works most effectively when both units are capable of NO200 operation. Regardless of the setting of NO200, the TNC complies. This ensures connectivity with non-MFJ units.

NODEFORW node Mode: Mailbox Default " "

Parameters:

node [via x...], up to 8 vias.

NODEFORW is an immediate command. It is similar to the FORWARD command except that the NODEFORW parameter is the callsign+via path to your NETROM, THENET, or KA node. When your TNC establishes the connection to the 'node', it sends the text in NODEPATH to establish a network link to the receiving BBS.

If all goes well, the forwardee will send its sign-on string, and forwarding will commence. To detect failure, NODEFORW looks for two strings - "BUSY" and "RETR" - as node connection failure indications. Upon finding "BUSY" or "RETR", the forward attempt is considered failed, and the TNC disconnects from the node. The command can contain the callsign of the "node" and up to 8 vias.