Epson MFJ-1278B manual Mrpt

MFJ-1278B MULTI-MODE APPENDIX H COMMAND SUMMARY

Command	Paramete	Default	Mode	Function	Page
	r
MRPT	ONOFF	on	Packet	Affects the way monitored packets are	6-80
				displayed.
MSPEED	nn	20	CW	Sets the operational speed which the MFJ-	6-80
				1278B will use for CW.
MSTAMP	ONOFF	off	Packet	Enables the time stamping of monitored	6-81
				packets.
MTIMEOUT	0-250	30	M-Packet	Mailbox connect will timeout after a time	6-81
				set by this command.
MULTIFAX	ONOFF	off	FAX	Enables multi-level FAX transmitting and	6-82
				receiving.
MYCALL	call	nocall	Packet	Sets the callsign of the MFJ-1278B.	6-82
MYcall	callsign	MFJPACTR	Pactor	Your Pactor amateur callsign	6-83
MYALIAS	call-n	blank	Packet	Specifies an alternate callsign for use as a	6-83
				digipeater only.
MYDLCNUM	0-254	0	Host	Sets the DLC number for Host Mode.	6-83
MYHIERAD	nnnn	text	M-Packet	Sets the heiarcal address text sent by a	6-84
				Mailbox forward.
MYMCALL	call	nocall	M-Packet	Dedicated mailbox callsign.	6-84
MYSELCAL	ssss	blank	AMTOR	Tells the MFJ-1278B what SELCALL	6-84
				your station should respond to.
NAVTEX	--	I-command	NAVTEX	Allows you to receive NAVTEX signals.	6-85
NAVSTN	xxxxx	all	NAVTEX	Allows you to receive certain NAVTEX	6-85
				stations.
NAVMSG	x	all	NAVTEX	Allows you to receive certain NAVTEX	6-86
				messages.
NEWMODE	ONOFF	off	Packet	Selects the way the MFJ-1278B behaves	6-87
				when connections are made and broken.
NO200	ON/OFF	OFF	Pactor	Enables or inhibits 200 baud Pactor mode.	6-88
NODEFORW	--	I-command	M-Packet	Similar to Forward command but with	6-88
				callsign+ up to 8 vias.
NODEPATH	--	I-command	M-Packet	Commands connected node by Nodeflow	6-89
				to link with the receiving BBS.
NOMODE	ONOFF	off	Packet	Determines if the MFJ-1278B will switch	6-89
				manually or automatically to command
				mode.
NUCR	ONOFF	off	Packet	Causes transmission of <null> characters,	6-90
				producing a delay following any <cr> sent
				to the terminal.
NULF	ONOFF	off	Packet	Same as NUCR, instead of <cr> it sends	6-90
				a delay after a <lf>.
NULLS	n	0	Packet	Used in conjunction with NUCR and	6-90
				NULF, and specifies how many <null>
				characters are sent.
OK	--	I-command	ASA	Use with ASA command to accept the	6-91
				analyzed signal.
OMLC	ONOFF	off	AMTOR	Instructs the MFJ-1278B to convert all	6-91