Epson MFJ-1278B manual Pactime

MFJ-1278B MULTI-MODE APPENDIX H COMMAND SUMMARY

Command	Paramete	Default	Mode	Function	Page
	r
PACTIME	n10	Packet	Determines the	6-92
			length of time
			between transmit
			and receive.
PARITY	n	0	Packet	Sets the parity mode for terminal or	6-92
				computer data transfer.
PASS	n	$16 (^V)	Packet	Selects the ASCII character used for the	6-93
				"pass" input editing character.
PAss	nnn	$16	Pactor	Same as the PASS command in other	6-93
				modes.
PASSALL	ONOFF	off	Packet	Causes the MFJ-1278B to display packets	6-94
				received with invalid CRC fields.
PIXTONES	n	--	FAX/SSTV	Sets transmit tones for multi-level	6-95
				FAX/SSTV pictures.
PKTPIX	ONOFF	off	Packet	Allows the MFJ-1278B to print packet	6-97
				pictures to the built-in printer port.
PRINTGRA	ONOFF	on	FAX/SSTV	Determines whether the MFJ-1278B will	6-98
				print the graphics to the printer or the
				terminal screen.
PRINTER	ONOFF	off	All	Turns the parallel printer port on or off.	6-98
PRINTTES	--	I-command	All	Used to test the printer connected to the	6-99
				parallel printer port.
PROFMARS	--	I-command	RTTY/ASCII	Invokes pre-set commands for MARS	6-99
				operation.
PTOver	nnn	I-command	Pactor	Designates the Pactor changeover	6-99
				character.
PTSend	--	I-command	Pactor	Same as issuing the U1 unproto	6-100
				command.
QRT	--	I-command	AMTOR	Used to break a link in AMTOR.	6-100
R	--	I-command	AMTOR	Is the equivalent to QRT.	6-100
RADIO	n	1	ALL	Allows the user to select the radio port on	6-100
				the MFJ-1278.
RANDOMCW	ONOFF	off	CW	Allows the used of the random code	6-101
				generator.
RBITMASK	$xx	0	RTTY/ ASCII	Set the bit inversion during receiving data	6-101
RECONNECT	call1-9	I-command	Packet	Used to change the path through which	6-101
				you are currently connected to a station.
REDISPLA	n	$12 (^R)	All	Used to change the redisplay-line input	6-102
				editing character.
REMSYSOP	call 0-15	blank	M-Packet	Permits the SYSOP to perform sysop	6-102
				functions remotely.
RESTART	--	I-command	Packet	Re-initializes the MFJ-1278B using the	6-103
				stored parameters.
RESET	--	I-command	All	Resets all parameters to their default	6-103
				values and reinitiates the unit.
RESPTIME	n	0	Packet	Sets a minimum delay that is imposed on	6-103
				acknowledging packets.