Buttons & Indicators | Keurig B31, 20079 specification

section 3 Buttons & Indicators

Power Button

The Power Button turns your Brewer On and Off.

Add Water Indicator

Flashing Blue — Indicates you should fill the

Cold Water Reservoir.

Brewer Handle Indicator

Flashing Blue — Indicates the minimum amount of water (6 oz.) has been poured into the Cold Water Reservoir and you’re ready to insert a K-Cup. Lift the Brewer Handle, insert a K-Cup, then lower the Brewer Handle completely and firmly to close.

BREW Button Indicators

BREW

Flashing Blue — Indicates you are ready to brew your beverage. Press the Brew Button once to start the brewing process.

Flashing Red — Indicates the water is heating. Solid Red — Indicates brewing has begun.

Drip Tray Overfill Indicator

A red float will appear when the Drip Tray is

almost full. Carefully slide the Drip Tray out and empty its contents.

Your Next Brew

When the brewing process is complete, your Brewer is ready for the next beverage. Begin the process again, adding fresh water and a new K-Cup.

Your Brewer will shut off automatically when it is idle for longer than 90 seconds. Simply press the Power Button to restart.