3.Push Cappuccino button. Display shows
COFFEE 2.0 OZ.
4.Push the Dial, COFFEE 2.0 OZ and turn until display shows COFFEE 4.0 OZ.
5.Push Dial to confirm: CONFIRMED 3 then
COFFEE 4.0 OZ.
6.Turn the Dial until display shows AROMA and the current strength setting of three beans.
7.Push the Dial, NORMAL and turn until display shows XSTRONG with five beans.
8.Push Dial CONFIRMED 3 then XSTRONG.
9.Turn the Dial until display shows MILK 14 SEC
10.Push dial, MILK 14 SEC, and turn until display shows MILK 20 SEC.
11.Push Dial: CONFIRMED 3 then MILK 20 SEC.
12.Turn Dial until the display shows EXIT and push.
SELECT PRODUCT.
13.If you do not want to change another button, turn
Dial until the display shows EXIT and push.
COFFEE READY.
For more programming options see Instruction Book, pages 24 through 29.
J) Installing the Clearyl Cartridge
•Rinse cartridge under running water. Snap the extension rod onto the top of cartridge. Insert into Water Tank reception, make sure tapered end fits snugly inside the fins. Close cartridge holder.
•Fill tank with cold water and replace.
Activating the Clearyl Cartridge:
You must activate the cartridge for the machine to monitor it properly. Otherwise the S9 OT assumes decalcifying mode.
COFFEE READY.
1.Push Rotary Dial. Display shows MAINTENANCE.
2.Turn Dial until display shows FILTER NO. Push Dial to enter the program.
3.Turn Dial until FILTER YES and push to confirm.
CONFIRMED 3 then INSERT FILTER/PRESS STEAM. The Rinse button illuminates.
4.Place a 20 oz. container under the frothXpress and turn the frothXpress dial to the 3 o'clock position.
5.Push the Rinse button. FILTER RINSING. For the next 60 seconds the machine will push water through the cartridge and the frothXpress system. Initially, the water may have a slight discoloration. The program stops automatically. COFFEE READY.
6.Turn frothXpress dial back to your preferred setting. Please note: As long as the filter is activated, the water hardness setting is automatically turned off.