Jura Capresso 68192, C9 manual Decalcifying Procedure

Page 28

17. DECALCIFYING

The machine has an integrated decalcifying program. This program takes 45 minutes. When the display shows READY / DE-SCALEit is time to decalcify the machine. The Rinse button is illuminated. You can still make coffee. It is recommended to decalcify the machine within the next 3 to 4 days.

Please note: If you use the Clearyl water cartridge and the display shows READY / DE-SCALEyour cartridge function was not activated. Follow the instructions in chapter 13a to activate the Clearyl cartridge. If the cartridge is in use for several weeks install a new cartridge.

Important: The decalcifying program must not be interrupted.

NOTE: Only use our special, square decalcifying tablets Model # 66281, see chapter 20.

CAUTION: Never use vinegar or any other decalcifying agent. This might damage internal parts of the machine.

CAUTION: Immediately remove any splashes of the decalcifying solution from sensitive surfaces, such as natural stone or wood. CAUTION: If the decalcifying solution comes in contact with the skin, rinse it off with water. If the solution comes in contact with your eyes, see a doctor.

Important: Always wait until the decalcifying solution in the water tank has been used up. Do not fill additional decalcifying solution into the water tank.

17.1 DECALCIFYING PROCEDURE

1.Push the Rinse button, display shows EMPTY TRAY.

2.Remove and empty the tray and the used coffee container and replace, display shows AGENT IN TANK.

Attention: If the tray and the used coffee container are

empty, you must remove the tray for approx. 20 seconds and then replace it.

3.Remove the frothXpress system from the Auto Cappuccino system.

4.Remove the water container and empty.

5.Completely dissolve 3 of the large square decalcifying tablets in a container with 18 oz. of water (0.5 liters) and pour the solution into the water tank.

6.Replace water tank. AGENT IN TANK. The Rinse button illuminates.

7.Place a large container under the Auto Cappuccino system (Fig. 18).

8.Push the Rinse button. The display shows DE-SCALINGand the light in the Rinse button flashes during the operation. The machine pumps the decalcifying solution in intervals through the Cappuccino system.

9.When display shows EMPTY TRAY, remove and empty the container. Then carefully remove and empty the tray and the used coffee container and replace.

10.Display shows FILL WATER TANK. Remove the water tank, rinse thoroughly, fill it halfway with fresh water and replace. The display shows PRESS RINSE.

11.Place the container under the Auto Cappuccino system and push the Rinse button DE-SCALING.

12.The machine pumps fresh water through the system and stops automatically. The display shows EMPTY TRAY.

13.Remove and empty the container. Then carefully remove and empty the tray and the used coffee container and replace. READY.

14.Attach the frothXpress system to the steam nozzle.

28.

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Impressa C9 Important Safeguards Customer Service Jura-Capresso15 16 17 Ready Frothing range Hot water/steam nozzle Siphoning With Flexible Hose Table of Contents Table of Contents 3a. BEAN-TO-CUP / Crema Coffee Welcome to the Impressa C9 One TouchHigh Pressure Brewing PLEASE, DON’T... or you void your warranty protection 3b. Different Coffee Drinks3c. Coffee Facts PLEASE, doFactory Settings / Options Preparing the Machine for the First TimeAdjusting the Grinder 6a. Filling the Water Tank6b. Filling the Bean Container 6c. Turning the Machine on for the First Time8a. Turning the Machine OFF / Rinsing Daily PreparationCoffee Preparation 9a. PRE-WARM Cups Ready 9d. Using PRE-GROUND Coffee 9b. Brewing Coffee and EspressoBrewing one cup Brewing two cups10a. Preparing the Thermal Milk Container Auto Cappuccino System10b. the Frothxpress System READY. Cappuccino 10c. Preparing ONE-TOUCH CAPPUCCINO, Café Mocha and Latte10d. Preparing Latte Macchiato 10e. Preparing HOT Milk / HOT Chocolate 10h. Using HOT Water10g. Cappuccino Rinsing Enough MILK? Enough COFFEE?Water Care 12a. Water Hardness Monitor12b. Changing the Water Hardness Monitor Clearyl Water Filter Cartridge13b. Automatic Clearyl Replacement 13c. Manual Clearyl ReplacementActivating 13d. do not LET the Clearyl Filter DRY OUTChapter ProgrammingExit Energy Saving Mode Restoring Factory Settings for Beverage ButtonsSetting the Actual Time Display Settings AM/PM / OZ Care and Maintenance MessagesAUTO-OFF InformationReady / Clean Press RinseFill Water Tank Tray MissingGeneral Cleaning Instructions Cleaning Cappuccino CleaningWater for Cappuccino Manual Tablet Cleaning Automatic Cleaning Cycles Cleaning with Special TabletEmptying the System Before Transport Decalcifying Procedure DecalcifyingError 2, Error Error 1, Error 3, ErrorError 6, Error 7, Error Supplies Grinder Makes AN Extremely Loud Noise no Beans are GroundClearyl Water Filter Cartridge one included Limited TWO-YEAR Warranty You can order these suppliesJura-Capresso Inc

C9, 68192 specifications

The Jura Capresso 68192, C9 is a premium fully automatic espresso machine that brings the coffeehouse experience into your home. Renowned for its reliability and high-quality coffee brewing capabilities, the C9 is a favorite among coffee enthusiasts. This machine is well-equipped with sophisticated technologies and features that make it a standout in the competitive market of home espresso machines.

One of the key features of the Jura Capresso C9 is its innovative brewing system, which uses a unique P.E.P. (Pulse Extraction Process) technology. This system optimizes the extraction time, ensuring that the coffee is brewed with the perfect flavor profile. By pulsing the water through the coffee grounds, it allows for better flavor extraction from the coffee beans, resulting in a rich and aromatic cup of coffee.

The C9 is also recognized for its adjustable coffee strength settings, allowing users to customize the intensity of their brew according to personal preferences. With a simple touch of a button, users can choose from a variety of strengths, catering to both mild and bold tastes. The machine is equipped with a powerful conical burr grinder that ensures fresh coffee grounds are used for each brew, enhancing the overall flavor of the coffee.

Another notable feature of the Jura Capresso C9 is its intuitive control panel. The large, easy-to-read display allows users to navigate through various settings and programs effortlessly. With just a few clicks, you can choose your coffee, adjust the strength, and even customize temperature settings.

The C9 also boasts a professional milk frother, which is perfect for creating lattes and cappuccinos. The steam wand can produce rich and creamy froth, elevating your coffee experience to a café-quality level.

With its sleek design and compact size, the Jura Capresso 68192, C9 fits well in any kitchen setting. The high-quality stainless steel housing not only adds to its aesthetic appeal but also ensures durability.

In conclusion, the Jura Capresso 68192, C9 is a sophisticated espresso machine that combines advanced technologies with user-friendly features. Its efficiency, versatility, and ability to produce high-quality coffee make it an excellent addition for any coffee lover looking to enjoy barista-level beverages at home.
Top Page Image Contents