Jura Capresso 68192, C9 manual Auto Cappuccino System, 10a. Preparing the Thermal Milk Container

•Push the Ground Coffee button (Fig. 3.3) FILL PRE-GROUND / READY.

•Fill 1 or 2 level measuring scoops of ground coffee into the opening for ground coffee (Fig. 1.7) and close the lid (Fig. 1.8).

•Now push one of the coffee buttons to brew your coffee, e.g. 1 COFFEE, then briefly PRE-GROUND. The pre-ground

coffee is tamped and brewed, then READY.

Please note: If the Ground Coffee button (Fig. 3.3) is pressed by mistake just press one of the coffee buttons, NOT ENOUGH PRE-GROUND. The machine will automatically stop and return to READY.

Please note: After use of sugar coated or flavored coffee through the pre-ground coffee funnel you may experience some flavor transfer when switching back to your regular coffee.

10. AUTO CAPPUCCINO SYSTEM

The C9 OT features the Auto Cappuccino System with two spouts located one in front of the other (Fig. 16) The front spout produces steam (steam nozzle). The rear spout produces high pressure brewed coffee. Attached to the steam nozzle is the removable frothXpress system (Fig. 13). It siphons, steams and froths milk. The C9 OT Cappuccino System prepares a variety of milk based drinks without ever moving the cup: Cappuccino, Latte, Café Mocha, Hot Milk, Hot Chocolate.

10a. PREPARING THE THERMAL MILK CONTAINER

The C9 OT comes with a 14 oz. double-walled vacuum stainless steel container. This custom-made milk container can keep cold milk cold for up to eight hours. There is no need to worry about the milk getting warm during the day.

The milk container comes complete with: • lid and attached stainless steel hose • two short flexible hoses • one long flexible hose • spare black and transparent fittings (Fig. 14 and 15).

The two short hoses have a connecting piece on each end.

•Unscrew the milk container lid. A stainless steel hose is attached to the inside of the container. A small transparent fitting holds the hose in place (a spare fitting is included).

•Rinse the milk container with fresh water before first use and fill with fresh cold milk. Close the container.

•Insert one end of the short flexible hose into the lid opening.

•Remove the red cap from the side of the frothXpress and insert the other end of the short flexible hose (Fig. 16).

You are ready to steam/froth milk.

Storing the milk container: always remove the outside flexible hose and unscrew the lid before storing the milk container in the refrigerator.

Important: The milk container is not dishwasher safe. Do not immerse the milk container in any liquid.

Using the long flexible hose: To siphon milk directly from a milk carton or any other container, use the long flexible hose. Insert one of the black connecting pieces in the straight-cut end of the hose and insert into the frothXpress. Insert the other end with the V-cut into the container with cold milk (Fig. 19).

10b. THE FROTHXPRESS SYSTEM

This system produces unlimited volumes of hot steamed or frothed milk right into your cup.

Important: This system siphons milk and mixes it inside the frothXpress with hot steam. It is necessary that all parts are connected tightly, otherwise the siphoning process will not work.

16.