Jura Capresso E9, 64701R2 warranty You must activate the cartridge as follows, HEATING. Ready

Page 16

•Close the holder for the cartridge so that it engages in the water tank (Fig.11).

•Fill the water tank with fresh cold water and replace.

You must activate the cartridge as follows:

1.Push and hold the P button (Fig. 3e). FILTER –

2.Push the Dial and the display shows NO –

3.Turn the Dial until the display shows YES ✔

4.Push Dial confirm. The display shows INSERT / OPEN TAP

5.Place a 20 oz. container underneath the frother.

6.Turn the Steam/Water Selector to the water symbol. FILTER RINSING. For the next 90 seconds the machine will push water through the filter and through the frother. Do not interrupt this process. This activates the filter.

The machine will stop automatically.

7.SHUT TAP. Turn the Water/Steam Dial back to the cup symbol.

HEATING. READY.

Please note: As long as the filter is activated, the water hardness setting is automatically turned off.

IMPORTANT: Do not let the filter dry out.

If you do not use your IMPRESSA for more than three days in a row and you still have an active filter, we recommend the follow- ing easy procedure: Empty the water tank, remove the filter and immerse it at least to a third of its length into a cup with cold water. Store the cup in the refrigerator. This way the filter does not dry out. When you use your machine again, install the filter. Use the hot water cycle and let approx. 16 oz. of water run through the system. Initially the water may be slightly discolored.

16b. REPLACING THE CLEARYL WATER CARTRIDGE The filter is monitored automatically. After approx. 75 liters of water (~2,500 oz.), the filter loses its effect. The display changes from READY to CHANGE FILTER / MACHINE READY. You can still make coffee, but we recommend replacing the filter within one week!

Attention: The filter should be changed every 3 months if you use less than 75 liters of water. In this case, no message will appear in the display.

Important: Once the filter has lost its calcium suppressing abilities, calcium will build up inside the machine. Since the Water Hardness Selector is off, the machine will not remind you when to decalcify. This could clog and ruin your machine.

•Remove the old filter. The cartridge is environmentally friendly. Dispose it with your regular household trash.

•Make sure the water tank is empty.

•Remove the new cartridge from its bag.

•Open water container lid and pull up the holder for the cartridge (Fig. 9).

•Insert the cartridge with its tapered end down into the water container. Make sure it fits securely inside the fins. Push down gently (Fig.10).

•Close the holder for the cartridge so that it engages in the water tank (Fig.11).

•Fill the water tank with fresh cold water and replace.

1.Push and hold the Rinse Button. The display shows RINSE and the Dial is illuminated.

2.Turn the Dial until the display shows FILTER.

3.Push the Dial. The display shows REPLACE OPEN TAP.

4.Place a 20 oz. container underneath the frother.

16.

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Impressa E Series Important Safeguards JURA-CAPRESSO Page Ready Dual Frother Plus Metal Tube Chrome Sleeve Steam Nozzle Table of Contents Product Registration Welcome to the Impressa E SeriesPLEASE, DON’T... or you void your warranty protection 3b. Different Coffee Drinks3c. Coffee Facts PLEASE, doPreparing the Machine for the First Time Factory SettingsAdding Coffee Beans Adjusting the Grinder Daily PreparationON/OFF Button Heating Rinse Ready Grinding and BrewingUsing HOT Water Using PRE-GROUND CoffeeGrinding times approx Heating and Frothing Milk Ready Heating Steam Ready 60 SEC Close TAPCleaning the Dual Frother Plus Clearyl Water Filter CartridgeHEATING. Ready You must activate the cartridge as followsImportant Do not let the filter dry out Adjusting the Water Hardness You can change the hardness settings as followsFilter Rinsing Programming18a. Aroma 18b. Auto SHUT-OFF18c. Stats usage 18d. Language SelectionCare and Maintenance 19e. General Cleaning Instructions Automatic Cleaning Cycles 20a. Rinsing20b. Cleaning with Special Tablet 19f. Emptying System Before TransportPush the Rinse button. The display shows Cleaning 20c. Decalcifying ProcedureTips for Better Coffee Height adjustable coffee-spout Supplies and AccessoriesFill Water Press RinseTroubleshooting Grinder Makes AN Extremely Loud Noise no Beans are GroundLimited Warranty Customer ServiceDrawer DOESN’T Pull OUT or Display Shows Malfunction Other limitations and exclusions

64701R2, E9 specifications

The Jura Capresso E9,64701R2 is a remarkable espresso machine that embodies sophistication and functionality, making it a favorite among coffee aficionados. This fully automatic coffee center is designed to produce high-quality espresso, cappuccino, and other coffee specialties, all at the touch of a button.

A standout feature of the E9 is its professional-grade conical burr grinder, which ensures a consistent and uniform grind for optimal flavor extraction. The grinder is adjustable, allowing users to customize the fineness of the coffee grounds to suit their personal preference. This flexibility enhances the overall coffee experience, as it accommodates various types of beans and brewing styles.

The E9 also boasts a stunning one-touch control system that simplifies the brewing process. With an intuitive interface, users can craft their favorite coffee drinks effortlessly. The machine is equipped with a high-performance brewing unit that can brew up to 15 bars of pressure, ensuring rich crema and deep flavor profiles in every shot of espresso.

One of the most notable technologies integrated into the Jura Capresso E9 is the Intelligent Pre-Brew Aroma System (IPBAS). This innovative feature pre-infuses the coffee grounds with a small amount of water before brewing, maximizing flavor extraction and creating a fuller-bodied coffee. This results in a more aromatic and flavorful cup, distinguishing the E9 from other espresso machines.

Additionally, the E9 is designed with a powerful milk frother, allowing users to create creamy froth for lattes and cappuccinos. The adjustable steam nozzle provides flexibility in frothing milk to the desired texture and temperature, enhancing the overall experience of preparing coffee beverages.

The machine is also built with ease of maintenance in mind. It has a removable brewing unit that can be washed to ensure the best hygiene standards, along with an integrated rinsing and cleaning program that simplifies upkeep. The large water reservoir and bean container mean less frequent refills, making it convenient for heavy users.

Compact yet stylish, the Jura Capresso E9,64701R2 is designed to fit seamlessly into any kitchen décor. Its sleek design and high-quality materials not only contribute to its visual appeal but also ensure durability and longevity.

In conclusion, the Jura Capresso E9,64701R2 combines advanced technology with user-friendly features, making it an excellent choice for those who cherish quality coffee. With its exceptional brewing capabilities, versatility, and ease of use, this espresso machine stands out as a premier choice for coffee lovers everywhere.
Top Page Image Contents