Jura Capresso E9 Fill Water, Press Rinse, Tips for Better Coffee Height adjustable coffee-spout

Page 22

thoroughly rinse all parts and replace. The display shows

FILL WATER.

8.Remove the water tank, rinse thoroughly, fill with cold fresh water and replace.

9.Place a large container (at least 20 oz.) underneath the frother. The display shows OPEN TAP.

10.Turn the Steam/Water Selector to the water symbol. The machine will pump hot water through the frother in intervals. During this procedure the display shows DECAL ON. When this cycle is finished the display shows SHUT TAP.

11.Turn the Steam/Water Selector back to the cup symbol.

The display shows DECAL ON. Now the machine pumps hot water through the coffee spout into the drawer.

12.When the cleaning cycle is completed the display shows EMPTY DRAWER. Remove the container from underneath the frother. Carefully lift and remove the drawer, empty and thoroughly rinse all parts and replace. The display shows

PRESS RINSE.

13.Push the Rinse Button. The machine will run a regular rinse cycle and the display will show READY.

14.Clean front of machine and grid with a moist, soft cloth. Attention: You can run a decalcifying cycle at anytime even if the machine does not prompt you,

READY. Push and hold the Rinse button until display shows RINSE. The Dial illuminates.

• Turn the Dial until display shows DECAL ON. Push the Dial. Display shows EMPTY DRAWER.

• Continue with step 2 above.

21.TIPS FOR BETTER COFFEE Height adjustable coffee-spout

Adjust the height of the coffee-spout to the size of your cups.

Grinding

Please refer to chapter 8 "Adjusting the Grinder."

Hotter Coffee / Pre-warm cups

You should warm cups in advance with hot water or steam. The smaller the quantity of coffee, the more important it is to warm your cups (see page 12).

Hotter Cream and Milk

Adding milk or cream from the refrigerator considerably lowers the temperature of the coffee. Preheat milk and cream with the steam function then brew your coffee (see page 14).

22.SUPPLIES AND ACCESSORIES

The following supplies are necessary to keep your machine in good working order:

Clearyl Water Filter Cartridge - Model #64553

Special Cleaning Tablets (white tablets) - Model #62205

Decalcifying tablets (large square tablets) - Model #61848 Please note: You must use decalcifying tablets if you do not use the Clearyl cartridge.

frothXpress Plus System with Milk Container - Model #64342

Cappuccino Cleaner -Model #63801 (removes milk fat from frother)

All supplies are available through:

-the enclosed mail order form that came with your machine

-our toll free line at 1-800-220-5701 or

-the Internet at www.capresso.com.

22.

Image 22
Contents Impressa E Series Important Safeguards JURA-CAPRESSO Page Ready Dual Frother Plus Metal Tube Chrome Sleeve Steam Nozzle Table of Contents Product Registration Welcome to the Impressa E Series3c. Coffee Facts PLEASE, DON’T... or you void your warranty protection3b. Different Coffee Drinks PLEASE, doPreparing the Machine for the First Time Factory SettingsAdding Coffee Beans ON/OFF Button Heating Rinse Ready Adjusting the GrinderDaily Preparation Grinding and BrewingUsing HOT Water Using PRE-GROUND CoffeeGrinding times approx Heating and Frothing Milk Ready Heating Steam Ready 60 SEC Close TAPCleaning the Dual Frother Plus Clearyl Water Filter CartridgeHEATING. Ready You must activate the cartridge as followsImportant Do not let the filter dry out Filter Rinsing Adjusting the Water HardnessYou can change the hardness settings as follows Programming18c. Stats usage 18a. Aroma18b. Auto SHUT-OFF 18d. Language Selection Care and Maintenance 20b. Cleaning with Special Tablet 19e. General Cleaning InstructionsAutomatic Cleaning Cycles 20a. Rinsing 19f. Emptying System Before TransportPush the Rinse button. The display shows Cleaning 20c. Decalcifying ProcedureFill Water Tips for Better Coffee Height adjustable coffee-spoutSupplies and Accessories Press RinseTroubleshooting Grinder Makes AN Extremely Loud Noise no Beans are GroundDrawer DOESN’T Pull OUT or Display Shows Malfunction Limited WarrantyCustomer Service Other limitations and exclusions