Jura Capresso 13637 manual Troubleshooting, ‘Fill bean container’ is, ‘Empty drip tray’ is

Page 45

 

 

7 Troubleshooting

7 Troubleshooting

 

 

 

 

Problem

Cause/Result

Action

 

 

 

When preparing a latte

T Turn the setting wheel of the cappuc-

macchiato, the typical

 

cino frother to the far right and the Milk

three layers do not

 

Foam position ü.

form.

 

T Change the length of the interval to at

 

 

least 30 seconds in programming mode

 

 

(see Chapter 4 ‘Permanent settings in

 

 

programming mode – Product settings’).

Insufficient foam is

The cappuccino frother is

produced when the

dirty.

milk is frothed or milk

 

sprays from the

 

cappuccino frother.

 

T Rinse and clean the cappuccino frother (see Chapter 5 ‘Maintenance – Rinsing the cappuccino frother’).

T Check that the air intake pipe is fitted on the cappuccino frother.

T Rinse or replace the air intake pipe. You will find a replacement in the Welcome Pack.

Coffee only comes out

Coffee or ground coffee has

T Put the grinder on a coarser setting or

in drips when it is

been ground too finely and

use coarser ground coffee (see Chapter 1

being prepared.

is blocking the system. The

‘Preparing and using for the first time –

 

same filter cartridge may

Adjusting the grinder’).

 

have been used several

T Perform descaling (see Chapter 5

 

times or the water hardness

‘Maintenance – Descaling the machine’).

 

set incorrectly in the

 

 

programming mode.

 

 

 

 

Water hardness cannot

The CLARIS Pro Blue filter

T Deactivate the filter cartridge in

be adjusted.

cartridge is activated.

programming mode.

 

 

 

‘Fill bean container’ is

The sliding catch for the

T Pull the sliding catch on the right-hand

displayed although the

bean container has not

side of the bean container fully out.

bean container is full.

been pulled out or has not

 

 

been pulled out completely.

 

 

 

 

‘Empty drip tray’ is

The metal contacts of the

T Clean and dry the metal contacts on

always displayed.

drip tray are dirty or wet.

the back of the drip tray.

 

 

 

‘Fill water tank’ is

The water tank float is

T Descale the water tank (see Chapter 5

displayed although the

trapped.

‘Maintenance – Descaling the water

water tank is full.

 

tank’).

 

 

 

45

Image 45
Contents Jura Type Impressa XJ9 Professional Instructions for UseYour Impressa XJ9 Professional Maintenance Symbol descriptionFiller funnel for ground coffee Control elementsHot-water nozzle Coffee grounds containerTop of the machine Front On/Off button Display Rotary Switch Proper use For your safety Supply and contact Jura serviceImportant information Damage the Impressa Puccino frother or its parts might come offImportant information Settings by the Jura Preparing and using for the first timeService technician Setting up the machineFilling the water tank Activating the filter First-time use‘Saved’ appears briefly on the display. ‘Water hardness’ ‘Welcome to JURA’Determining the water hardness ‘Please press the Rotary Switch.’Connecting milk Adjusting the grinderRoast of your coffee Hand side of the cappuccino frotherPreparation Ways of preparing aBeverage Preparing two speciality coffees Espresso and coffeeWarm milk and milk foam Latte macchiato, cappuccinoTPress the ‘Latte macchiato’ button Ground coffee ‘Please add ground coffee.’‘Please select product’ TPress the ‘Espresso’ button ‘Low’, ‘Normal’, ‘X high’ Hot waterDaily operation Switching on Daily maintenanceSpeciality coffee or milk are rinsed Switching offPermanent settings in programming mode ‘Maintenance counter’ Programming mode‘Information 6/6’ ‘Product counter’ ‘Day counter’Product settings Settings Enable or disable one-offTo ‘40 sec.’ ‘Active’TPress the ‘product selector’ button. ‘product selector’ Product selector view you can make the following settingProducts Enabling and disablingSetting the water hardness ‘Rinse the milk system’ / ‘Immediate’TPress the ‘Water hardness’ button. ‘Water hardness’ Energy-saving mode PlayedTPress the ‘Save energy’ button. ‘Save energy’ TPress the ‘Switch off after’ button. ‘Switch off after’ Automatic switch-offLowing the last action on the machine Or 1-15 hoursTPress the ‘Factory setting’ button. ‘Factory setting’ ‘Display settings’‘Machine’ ‘Product’Background colour LanguageTPress the ‘Choose language’ button. ‘Choose language’ TPress the ‘Colour scheme’ button. ‘Colour scheme’Changing the filter TPress the ‘Product counter’ buttonNumber of speciality coffees prepared is displayed Daily when you have been preparing milk MaintenanceRinsing the machine Place a receptacle under the coffee spoutCleaning the cappuccino frother Rinsing the cappuccinoFrother Firmly attach it to the connector Inserting and activating the filterDismantling and rinsing the cappuccino frother TPress the ‘Filter’ button. ‘Filter’ Changing the filterTPress the ‘Next’ button. ‘Change filter’ Jura cleaning tablets are available from specialised dealers Avoid contact with the skin or eyes ‘Pour descaling agent into water tank’ ‘Descale’Container Cleaning the beanDisplay messages ‘Fill bean container’ is Troubleshooting‘Empty drip tray’ is ‘Fill water tank’ isOther ‘ERROR’ Transport / Emptying Transport and environmentally friendly disposalSystem DisposalTechnical data ‘Save energy’ / ‘Active’‘Save energy’ / ‘Inactive’ Contact details 52 Cover Storage compartment 4 Water tank IndexContact details Internet Language Latte macchiato JuraIndex Jura contact details / Legal information
Related manuals
Manual 56 pages 55.74 Kb

13637 specifications

The Jura Capresso 13637 is a prominent choice among coffee aficionados, blending sophisticated technology with user-friendly features to deliver an exceptional brewing experience. Known for its elegant design and robust performance, this automatic coffee machine stands out in the crowded market of espresso makers.

One of the standout features of the Jura Capresso 13637 is its integrated conical burr grinder, which ensures consistently ground coffee for optimal flavor extraction. The machine boasts multiple grind settings, allowing users to customize the coarseness of their coffee beans according to personal preference. This feature not only preserves the aromatic profiles of the beans but also enhances the overall quality of the brew.

The Jura Capresso 13637 is equipped with a Dual Frothing System, offering barista-quality milk frothing at home. This technology provides the capability to create velvety microfoam, perfect for crafting lattes, cappuccinos, and other milk-based beverages. The machine's steam wand is user-friendly and adjustable, enhancing the versatility and creativity of the user.

Another notable characteristic is the One-Touch feature, which enables the preparation of a range of specialty drinks at the touch of a button. From espresso to lungo and everything in between, this machine simplifies the coffee-making process without sacrificing quality. The intuitive control panel, complete with an LCD display, allows for easy navigation, making it accessible for both beginners and seasoned coffee lovers.

The Jura Capresso 13637 also emphasizes convenience with its removable water tank and drip tray, ensuring effortless cleaning and maintenance. The water tank holds a generous capacity, reducing the frequency of refills and allowing users to brew multiple cups without interruption. Additionally, the integrated descaling program helps maintain the machine's longevity and efficiency.

With energy efficiency in mind, this model features an automatic shut-off function, which helps reduce power consumption when the machine is not in use. This makes the Jura Capresso 13637 not only a practical choice for coffee enthusiasts but also an eco-friendly option for the environmentally conscious.

In conclusion, the Jura Capresso 13637 combines advanced technology with practical features, delivering a versatile and high-quality coffee brewing experience. Whether you are enjoying a simple shot of espresso or indulging in a frothy cappuccino, this machine stands ready to cater to your coffee desires with precision and style.