Jura Capresso 13637 manual Puccino frother or its parts might come off, Damage the Impressa

Page 7

Important information

UTo completely and safely disconnect the machine from the power supply, first switch off the IMPRESSA using the On/Off

button and then at the power switch. Only then should you remove the mains plug from the power socket.

There is a risk of scalds or burns on the spouts and the cappuccino frother.

UPlace the machine out of the reach of children.

UDo not touch any hot parts. Use the handles provided.

UEnsure that the cappuccino frother is correctly fitted and clean. If incorrectly fitted or if they become blocked, the cap-

puccino frother or its parts might come off.

A defective machine is not safe and could cause injury or fire. To avoid damage and any associated risk of injury or fire:

UNever allow the mains cable to loosely hang down. The mains cable could pose a tripping hazard or become damaged.

UProtect the IMPRESSA from environmental influences such as rain, frost and direct sunlight.

UDo not immerse the IMPRESSA, mains cable or connections in water.

UDo not put the IMPRESSA or any individual parts in the dish- washer.

USwitch your IMPRESSA off at the power switch before any cleaning operation. Always wipe the IMPRESSA with a damp

cloth rather than a wet one, and protect it from prolonged exposure to water splash.

UThe IMPRESSA is not suitable for installation on a surface where a jet of water can be used.

UThe machine must not be cleaned with a jet of water.

UOnly connect the machine to the mains voltage in accordance with the information on the rating plate. The rating plate is

located on the underside of your IMPRESSA. Further technical data is provided in these instructions for use (see Chapter 9 ‘Technical data’).

UPlease only use original JURA maintenance products. Use of products that are not explicitly recommended by JURA could

damage the IMPRESSA.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Jura Type Impressa XJ9 Professional Instructions for UseYour Impressa XJ9 Professional Maintenance Symbol descriptionCoffee grounds container Control elementsFiller funnel for ground coffee Hot-water nozzleTop of the machine Front On/Off button Display Rotary Switch Supply and contact Jura service Proper use For your safetyImportant information Damage the Impressa Puccino frother or its parts might come offImportant information Setting up the machine Preparing and using for the first timeSettings by the Jura Service technicianFilling the water tank Activating the filter First-time use‘Saved’ appears briefly on the display. ‘Water hardness’ ‘Welcome to JURA’Determining the water hardness ‘Please press the Rotary Switch.’Hand side of the cappuccino frother Adjusting the grinderConnecting milk Roast of your coffeeWays of preparing a PreparationBeverage Preparing two speciality coffees Espresso and coffeeLatte macchiato, cappuccino Warm milk and milk foamTPress the ‘Latte macchiato’ button ‘Please add ground coffee.’ Ground coffee‘Please select product’ TPress the ‘Espresso’ button ‘Low’, ‘Normal’, ‘X high’ Hot waterDaily operation Switching on Daily maintenanceSpeciality coffee or milk are rinsed Switching offPermanent settings in programming mode ‘Day counter’ Programming mode‘Maintenance counter’ ‘Information 6/6’ ‘Product counter’Product settings ‘Active’ Enable or disable one-offSettings To ‘40 sec.’TPress the ‘product selector’ button. ‘product selector’ Product selector view you can make the following settingProducts Enabling and disabling‘Rinse the milk system’ / ‘Immediate’ Setting the water hardnessTPress the ‘Water hardness’ button. ‘Water hardness’ Played Energy-saving modeTPress the ‘Save energy’ button. ‘Save energy’ Or 1-15 hours Automatic switch-offTPress the ‘Switch off after’ button. ‘Switch off after’ Lowing the last action on the machine‘Product’ ‘Display settings’TPress the ‘Factory setting’ button. ‘Factory setting’ ‘Machine’TPress the ‘Colour scheme’ button. ‘Colour scheme’ LanguageBackground colour TPress the ‘Choose language’ button. ‘Choose language’TPress the ‘Product counter’ button Changing the filterNumber of speciality coffees prepared is displayed Place a receptacle under the coffee spout MaintenanceDaily when you have been preparing milk Rinsing the machineRinsing the cappuccino Cleaning the cappuccino frotherFrother Inserting and activating the filter Firmly attach it to the connectorDismantling and rinsing the cappuccino frother TPress the ‘Filter’ button. ‘Filter’ Changing the filterTPress the ‘Next’ button. ‘Change filter’ Jura cleaning tablets are available from specialised dealers Avoid contact with the skin or eyes ‘Pour descaling agent into water tank’ ‘Descale’Container Cleaning the beanDisplay messages ‘Fill water tank’ is Troubleshooting‘Fill bean container’ is ‘Empty drip tray’ isOther ‘ERROR’ Disposal Transport and environmentally friendly disposalTransport / Emptying System‘Save energy’ / ‘Active’ Technical data‘Save energy’ / ‘Inactive’ Contact details 52 Cover Storage compartment 4 Water tank IndexContact details Internet Language Latte macchiato JuraIndex Jura contact details / Legal information
Related manuals
Manual 56 pages 55.74 Kb

13637 specifications

The Jura Capresso 13637 is a prominent choice among coffee aficionados, blending sophisticated technology with user-friendly features to deliver an exceptional brewing experience. Known for its elegant design and robust performance, this automatic coffee machine stands out in the crowded market of espresso makers.

One of the standout features of the Jura Capresso 13637 is its integrated conical burr grinder, which ensures consistently ground coffee for optimal flavor extraction. The machine boasts multiple grind settings, allowing users to customize the coarseness of their coffee beans according to personal preference. This feature not only preserves the aromatic profiles of the beans but also enhances the overall quality of the brew.

The Jura Capresso 13637 is equipped with a Dual Frothing System, offering barista-quality milk frothing at home. This technology provides the capability to create velvety microfoam, perfect for crafting lattes, cappuccinos, and other milk-based beverages. The machine's steam wand is user-friendly and adjustable, enhancing the versatility and creativity of the user.

Another notable characteristic is the One-Touch feature, which enables the preparation of a range of specialty drinks at the touch of a button. From espresso to lungo and everything in between, this machine simplifies the coffee-making process without sacrificing quality. The intuitive control panel, complete with an LCD display, allows for easy navigation, making it accessible for both beginners and seasoned coffee lovers.

The Jura Capresso 13637 also emphasizes convenience with its removable water tank and drip tray, ensuring effortless cleaning and maintenance. The water tank holds a generous capacity, reducing the frequency of refills and allowing users to brew multiple cups without interruption. Additionally, the integrated descaling program helps maintain the machine's longevity and efficiency.

With energy efficiency in mind, this model features an automatic shut-off function, which helps reduce power consumption when the machine is not in use. This makes the Jura Capresso 13637 not only a practical choice for coffee enthusiasts but also an eco-friendly option for the environmentally conscious.

In conclusion, the Jura Capresso 13637 combines advanced technology with practical features, delivering a versatile and high-quality coffee brewing experience. Whether you are enjoying a simple shot of espresso or indulging in a frothy cappuccino, this machine stands ready to cater to your coffee desires with precision and style.
Top Page Image Contents