Locke RS-5100 manual Safety Decals, Hazardous Voltage

SAFETY DECALS

To promote safe operation, Locke Turf supplies safety decals on all products manufactured. Because damage can occur to safety decals either through shipment, use or reconditioning, Locke Turf will, upon request, provide safety decals for any of our products in the field at no charge. Contact your authorized Locke Turf dealer for more information.

WARNING

BASIC GRINDER SAFETY PRACTICES TO AVOID

SERIOUS INJURY OR DEATH:

BEFORE OPERATING GRINDER:

READ AND UNDERSTAND OPERATOR'S MANUAL.

ALLOW NO CHILDREN OR UNTRAINED PERSONS

TO OPERATE GRINDER.

KEEP OTHERS AT A SAFE DISTANCE FORM GRINDER.

AVOID REEL INTANGLEMENT OR GRINDER THROWN

OBJECTS OR DEBRIS.

CLEAR ALL LOOSE OBJECTS AND DEBRIS FROM GRINDER.

ALWAYS FULLY SECURE REEL OR BEDKNIFE IN

MOUNTS BEFORE GRINDING.

CHECK FEEL AND BEDKNIFE "IN-FEED" CLEARANCE

BEFORE GRINDING.

AVOID SHATTERING OR FRAGMENTING GRINDING STONE

INTO THROWN OBJECTS FROM TOO MUCH "IN-FEE."

WHEN OPERATING GRINDER:

KEEP GRINDER SAFETY CANOPIES AND STONE

SHIELDS IN PLACE AND IN GOOD CONDITION.

DO NOT OPERATE GRINDER WITH DAMAGED OR

MISSING SAFETY CANOPIES AND SHIELDS.

ALWAYS WEAR SAFETY GLASSES AND HEARING

PROTECTION WHEN GRINDING.

KEEP HANDS CLEAR OR SPINNING REEL AND

GRINDING STONE.

TRAVEL SLOWLY OVER REEL OR BEDKNIFE "HIGH"

AREAS AND FOLLOW ADJUSTING INSTRUCTIONS.

WHEN SERVICING GRINDER:

SHUT-OFF AND LOCK-OUT ELECTRICAL POWER

BEFORE SERVICING GRINDER OR OPENING

ELECTRICAL CONTROL BOX.

USE CARDBOARD TO CHECKFOR PRESSURIZED COOLANT LEAKS.

DO NOT USE HANDS OR SKIN. HIGH PRESSURE LEAK CAN PENETRATE

SKIN AND MUST BE SURGICALLY REMOVED BY A DOCTOR FAMILIAR WITH

THIS INJURY TYPE WITHIN A FEW HOURS TO AVOID GANGRENE OR DEATH

USE EXTREME CARE WHEN INSTALLING NEW GRINDING STONE

TO AVOID CRACKING STONE. DAMAGED STONES COULD CHIP OR

SHATTER CAUSING SERIOUS INJURY TO OPERATOR.

BALANCE AND "DRESS" NEW GRINDING STONES AFTER

REPLACING OLD STONES FOR PROPER GRINDING OPERATION.

WARNING

SPIN, RELIEF AND BEDKNIFE

GRINDING SAFETY PRACTICES

TO AVOID SERIOUS INJURY OR DEATH:

SPIN GRINDING:

ADJUST FOR SLIGHT CONTACT BETWEEN REEL BLADE AND GRINDING STONE.

AVOID SHATTERING OR CHIPPING GRINDING STONE INTO THROWN OBJECTS

BY TOO MUCH REEL CONTACT.

KEEP FRONT AND REAR SAFETY CANOPY SHIELDS CLOSED DURING

SPIN GRINDING.

AVOID POSSIBLE THROWN OBJECTS AND BLADE BLADE CONTACT INJURIES.

RELIEF GRINDING:

FIRMLY SIT REEL BLADE OR FINGER GUIDE.

AVOID SHATTERING OR CHIPPING GRINDING STONE INTO THROWN OBJECTS

OR METAL CHIPS BY IMPROPER ADJUSTMENTS.

WEAR SAFETY GLASSES AND FULL FACE SHIELD PROTECTION.

THE FRONT SAFETY CANOPY SHIELD IS OPEN DURING RELIEF GRINDING.

WEAR PROTECTIVE (KEVLAR OR CHAIN MAIL TYPE) GLOVES WHEN MANUALLY

INDEXING REEL.

AVOID SERIOUS HAND CUTS OR FINGE SEVERING INJURIES.

KEEP HANDS CLEAR OF REEL AND GRINDING STONE PINCH POINTS WHEN

MANUALLY TURNING REEL.

BEDKNIFE GRINDING:

ADJUST CUPPED GRINDING WHEEL OUTSIDE EDGE TO AVOID MAKING

CONTACT WITH BED BAR OR MOUNTING BRACKET PARTS. AVOID

SHATTERING OR CHIPPING GRINDING STONE INTO THROWN OBJECTS.

WEAR SAFETY GLASSES AND FULL FACE SHIELD PROTECTION.

THE FRONT SAFETY CANOPY SHIELD IS OPEN DURING BEDKNIFE GRINDING.

FOLLOW OPERATOR MANUAL'S GRINDING OPERATION INSTRUCTIONS,

SAFETY PRACTICES AND PRECAUTIONS.

WARNING

HAZARDOUS VOLTAGE

CAN CAUSE SERIOUS INJURY

OR DEATH OF HAND OR ANY PART

OF BODY IS PLACED IN THIS

ELECTRICAL ENCLOSURE.

TURN OFF MAIN POWER AND

LOCK OUT THE DISCONNECT

SWITCH BEFORE OPENING THIS

ELECTRICAL ENCLOSURE.

DO NOT REMOVE OR COVER THIS SIGN

28