Premio Computer Premio Computer system manual Mainboard Specification

Page 35

Chapter 1

Mainboard Specification

CPU

Supports Intel® Pentium® 4 (Willameete/Northwood) processor in the 478 pin package.

Supports from 1.6GHz to 2.53GHz and up.

Chipset

Intel® 850E

-Supports Direct RDRAM up to 2GB maximum memory.

-Supports System bus at 100/133 HMz (400/533 MHz System bus).

-1.5V AGP interface with 4x data transfer and 4x fast write capability. Intel® ICH2

-Upstream hub interface for access to the Intel MCH.

-2-channel Ultra ATA 100 Bus Master IDE controller.

-USB controller 1.1 (expanded capabilities for 4 ports).

-I/O APIC.

-SMBus controller.

-FWH interfaceAuto enables onboard SCSI termintor

-LPC interface, AC’97 2.1 interface, PCI 2.2 interface.

-Integrated system management controller.

-Low pin count interface for SIO.

MainMemory

Supports four 184-pin gold-lead RIMM sockets.

Supports a maximum memory size of 2GB.

Slots

One AGP (Accelerated Graphics Port) 4x slot.

Four 32-bit/33 MHz PCI bus slots.

Support 3.3v/5v PCI bus interface.

One CNR (Communication Network Riser) slot.

On-Board IDE

An IDE controller on the Intel® ICH2 chipset provides IDE HDD/CD-ROM with PIO, Bus Master and Ultra DMA 100 operation modes.

Can connect up to four IDE devices.

On-Board Peripherals

Intergrated Super I/O Controller

-1 floppy port supports 2 FDDs with 360K, 720K, 1.2M, 1.44M and

1-2

Page 34 Page 36
Image 35
Page 34 Page 36
Contents Athena System Manual Disclaimers CopyrightContents System Unit Problems Hard Disk Problems Getting Started Setting Up Connecting Your Keyboard, Mouse, and Speakers Connecting Your Monitor Switches and Indicators Upgrading Opening the System Unit Premio System Manual Closing the System Unit Installing an Expansion Card Premio System Manual Installing Additional Memory Installing an Additional Hard Disk Drive Getting Help Keyboard Does Not Work Hard Disk Problems Warranty ServiceSystem Unit Problems Premio on the Internet Technical SupportAppendix Limited 3-Year WarrantyPremio System Manual FCC Standards Important Safety Instructions Page MSI 850E Max FCC-B Radio Frequency Interference Statement Edition Safety Instructions Contents Award Bios Setup Glossary Appendix A. Using 4-/6-channel Audio FunctionGetting Started Mainboard Specification Intel LAN Optional DimensionUSB Interface AudioMainboard Layout Quick Components Guide Key Features P Tech MSI Special FeaturesFuzzy Logic FeaturesPC Alert Live BIOS/Live Driver Live Monitor Description Bracket 2 OptionalBracket Description Hardware Setup Your fingers pressing tightly CPU Installation Procedures for SocketInstalling the CPU Fan Then CPU Core Speed Derivation ProcedureMemory Population Rules Memory InstallationDimm Socket Memory Module Total Memory Installing Rimm ModulesATX 20-Pin Power Connector JPWR1 Power SupplyATX 5V/3V Power Connector JPWR2 ATX 12V Power Connector JPWR3Back Panel Mouse Connector JKBMS1USB 1.1 Connectors Keyboard Connector JKBMS1Stereo Audio Connectors Serial Port Connector COM a & COM BAudio Port Connectors Parallel Port Connector LPT1 Floppy Disk Drive Connector FDD1 ConnectorsTIP Hard Disk Connectors IDE1 & IDE2JFP2 Front Panel Connector JFP1 and JFP2 Optional Intel SpecFan Power Connectors CPUFAN/SYSFAN/PSFAN JAUD1 Front Panel Audio Connector JAUD1 Optional Intel specBluetooth Connector JBT1 Optional Wake On Ring Connector JWR1 CD-In Connector JCD1Chassis Intrusion Switch Connector JCI1 IrDA Infrared Module Connector JIR1Power Saving Switch Connector JGS1 Remote Power On/Off Switch Connector JRMS1Front USB 2.0 Connectors JUSB1 & JUSB2 Optional To Attach the Optional USB 2.0 Ports JDB1 Bracket 2 Connector JDB1Clear Cmos Jumper JBAT1 JumpersBios Flash Jumper J5 Clear Bios Password Jumper J6LAN Enable/Disable Jumper J2 Rdram Over Voltage Jumper J1 CNR Communication Network Riser Slot SlotsAGP Accelerated Graphics Port Slot PCI SlotsPCI Interrupt Request Routing Award Bios Setup Control Keys Entering SetupGeneral Help F1 Getting HelpMainMenu Sub-MenuMain Menu PC Health Status LoadOptimizedDefaultsSet Supervisor/User Password Save & Exit SetupIDE Primary/Secondary Master/Slave Standard Cmos FeaturesTime HaltOn VideoVirus Warning Advanced Bios FeaturesBios Flash Write Control Quick Power On Self TestBoot Up NumLock Status First/Second/Third Boot DeviceBoot Other Device Boot Up Floppy SeekGate A20 Option Typematic Rate SettingTypematic Delay Msec Apic ModeReport No FDD For WIN MPS Version Control For OSOS Select For Dram 64MB HDDS.M.A.R.T.CapabilityRdram Bus Frequency Advanced Chipset FeaturesSystem Bios Cacheable Video Bios CacheableAGP Aperture Size MB Delayed TransactionDelay Prior to Thermal VideoRAMCacheableIDEPrimary/SecondaryMaster/SlaveUDMA Integrated PeripheralsOn-ChipPrimary/SecondaryPCIIDE IDE Primary/Secondary Master/Slave PIOUSB 2.0 Controller USB/USB2 ControllerUSBKeyboardSupport USB Mouse SupportHot Key Power on IDE HDD Block ModePOWERONFunction KB Power on PasswordEPP Mode Select IR Transmission DelayUse IR Pins Parallel Port ModeGame Port Address Power Status LedECPModeUseDMA Pwron After PWR-FailACPISuspendType Power Management SetupACPIFunction Video Off In Suspend Run Vgabios if S3 ResumePowerManagement VideoOffMethodSoft-OffbyPWR-BTTN HDDPowerDownResume by Alarm SuspendModeTime hhmmss Alarm Date of Month AlarmIRQ Resources PNP/PCI ConfigurationsReset Configuration Data Resource Controlled ByPCI/VGA Palette Snoop VGA Palette Snoop Bit Setting ActionChassis Intrusion Detect CPU Warning TemperatureShutdownTemperature PC Health StatusAuto Detect PCI Clk Frequency/Voltage ControlCPU Clock Ratio CPU Vcore SelectCPU Clock High System Performance Load Optimized Defaults Set Supervisor/User Password About Supervisor Password & User Password Save & Exit Setup Exit Without Saving Using 4-/6-channel Audio Function a Click on C-Media Sound Drivers Installing C-Media DriversHardware Configuration To install C-Media driversTo set the multi-channel configuration Software ConfigurationGlossary Dynamic RAM Dram Memory Technologies IEEE1394 PS/2 Port

Premio Computer specifications

Premio Computer is a leading provider of custom computer solutions and systems, catering to a diverse range of industries and applications. Established with a vision to deliver high-performance computing solutions, Premio has gained recognition for its robust product offerings, cutting-edge technologies, and unwavering commitment to quality.

One of the standout features of Premio Computer is its dedication to customization. The company understands that businesses have unique requirements, and therefore, it offers a wide array of customizable options in its products. Clients can choose from different configurations, including CPU, GPU, memory, storage, and form factors, to create a system that meets their specific needs. This flexibility allows businesses to optimize performance without overspending on unnecessary features.

Premio's product line includes rugged embedded computers, industrial PCs, server solutions, and digital signage displays. Their rugged embedded computers are designed to withstand harsh environments, making them suitable for applications in transportation, military, and outdoor environments. These systems typically incorporate advanced thermal management and are compliant with various environmental standards, ensuring reliability and longevity.

Moreover, Premio Computer integrates the latest technologies to enhance its systems' performance and efficiency. Many of their products leverage Intel’s latest processors, providing significant improvements in processing power and energy efficiency. Additionally, systems are often equipped with advanced graphics capabilities, making them suitable for graphics-intensive applications such as AI, deep learning, and 3D rendering.

Premio also emphasizes connectivity and expandability in its designs. Many systems feature a variety of ports and slots, enabling users to easily add peripherals and enhance functionality. This modular approach allows businesses to adapt their systems as their needs change without requiring a complete hardware overhaul.

Another characteristic that sets Premio apart is its commitment to customer support. Offering extensive warranty options and a responsive service team, the company ensures that clients can rely on their products for optimal performance over time. The combination of quality engineering, technological innovation, and customer-centric policies positions Premio Computer as a preferred partner for organizations looking to leverage advanced computing solutions in today's competitive landscape. In summary, Premio Computer stands out for its customizable solutions, rugged designs, advanced technology integration, and comprehensive customer support, making it a versatile player in the computing industry.
Top Page Image Contents