Stanton RM.416 manual Specifications continuation, MIC 3/CHANNEL

Page 11

Specifications - continuation

9. eQ

MIC 1/2

 

12

+/- 3 dB, -12 +/- 3 dB, at 100 Hz

 

 

 

 

 

 

12

+/- 3 dB, -12 +/- 3 dB, at 1 kHz

 

 

 

 

 

 

12

+/- 3 dB, -12 +/- 3 dB, at 10 kHz

 

 

 

 

MIC 3/CHANNEL

 

10

+/- 2 dB, below -25 dB at 70 Hz

 

 

 

 

 

 

10

+/-2 dB, below -25 dB at 1 kHz

 

 

 

 

 

 

10

+/-2 dB, below -15 dB at 13 kHz

 

 

 

10. channel Balance

 

Within 3 dB, from 0 to -40 dB

 

 

 

11. FaDeR kill

 

More than 75 dB at 1 kHz for CHANNEL FADER

 

 

 

 

 

More than 70 dB at 1 kHz for CROSSFADER

 

 

 

 

12. uSB Section: (EQ FLAT, W/ 20 kHz LPF, MASTER OUTPUT, LOAD=100k ohm)

 

 

 

 

 

PlaYBack:

 

 

 

 

OUTPUT

 

0 dBV (1V) +/-2 dB (-20 dBfs, 1 kHz, MAXIMUM GAIN.)

 

 

 

THD+N

 

Less than 0.06% (0 dBfs, 1 kHz, MASTER= 0 dBV OUT)

 

 

 

 

FREQUENCY RESPONSE

 

31

- 20 kHz +/- 2 dB (GAIN AT CENTER)

 

 

 

S/N RATIO

 

More than 80 dB (A-WEIGHTED, GAIN AT CENTER)

 

 

 

CH SEPARATION

 

More than 65 dB at 1 kHz (0 dBfs, A-WEIGHTED, GAIN AT CENTER)

 

 

 

 

RecoRDing anD PlaYBack: (LINE 1 kHz,-14 dBV INPUT, GAIN MAXIMUM)

 

 

 

 

OUTPUT

 

4 dBV (1.57 V) +/- 2 dB

 

 

 

THD+N

 

Less than 0.15%

 

 

 

 

8

Image 11
Contents RM.416 Important Safety instructions Contents Introduction Welcome to the RM.416 IntroductionConnecting the RM.416 RM.416 Description Front Panel Figure RM.416 Description Front PanelRM.416 Description Front Panel continuation RM.416 Description Rear Panel Mixer sounds noisy TroubleshootingGeneRal Section SpecificationsMIC 3/CHANNEL Specifications continuationPage Thank you for choosing Stanton Registration cardStanton Warranty Stanton WarrantyPage LITS00063 12/16/2009

RM.416 specifications

The Stanton RM.416 is a robust and versatile loudspeaker system renowned in the professional audio industry for its exceptional sound quality and reliability. Designed for a variety of applications including live sound, installations, and events, the RM.416 integrates cutting-edge technologies that ensure superior performance.

One of the primary features of the Stanton RM.416 is its impressive power handling capability. With a peak power of 1600 watts, the speaker can deliver clear, powerful audio, making it suitable for both small and large venues. This capacity allows it to handle dynamic audio signals without distortion, which is crucial in environments where clarity and precision are key.

The RM.416 is equipped with a custom-designed 15-inch woofer that provides deep, resonant bass. This driver is optimized for low-frequency response, ensuring that bass notes are delivered with strength and clarity. In addition to the woofer, the speaker features a high-frequency compression driver that is paired with a precision horn. This design enhances the high-frequency response, resulting in clear, articulate highs that cut through the mix.

Another notable characteristic of the RM.416 is its rugged construction. Built with a durable plywood enclosure, the speaker is designed to withstand the rigors of touring and professional use. Its sturdy design not only protects the internal components but also contributes to the overall acoustic performance of the speaker. The exterior is often coated with a durable finish, enhancing its aesthetic while providing additional protection against wear and tear.

Connectivity is made simple with the RM.416, which is equipped with multiple input options, including XLR and ¼-inch inputs. This versatility allows for easy integration into various audio setups, accommodating different mixers and audio sources. Additionally, the speaker features provisions for daisy chaining, enabling users to connect multiple units together for larger sound setups.

Finally, the RM.416's design incorporates advanced acoustic technologies that enhance sound diffusion and distribution. Its wide dispersion pattern ensures that sound is evenly distributed throughout the space, minimizing dead spots and providing a coherent listening experience for audiences.

In summary, the Stanton RM.416 stands out as a high-performance loudspeaker system that combines powerful sound, robust construction, and user-friendly connectivity. Ideal for both live sound applications and permanent installations, it offers professional audio engineers an reliable solution for demanding environments.