Important Safety instructions

1.Read these instructions.

2.Keep these instructions.

3.Heed all warnings.

4.Follow all instructions.

5.Do not use the apparatus near water.

6.Clean only with dry cloth.

7.Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliﬁers) that produce heat.

9.Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not ﬁt into your outlet, consult an electrician for replacement of the obsolete outlet.

10.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11.Only use attachments/accessories speciﬁed by the manufacturer.

12.Use only with a cart, stand, tripod, bracket or table speciﬁed by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13.Unplug this apparatus during lighting storms or when unused for long periods of time.

14.Refer all servicing to qualiﬁed service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15.When the mains plug or appliance coupler used as the disconnect device, it shall remain readily operable.

16.Please keep the unit in a good ventilation environment.

17.This product is in compliance with EU WEEE regulations. Disposal of end of life product should not be treated as municipal waste. Please refer to your local regulations for instructions on proper disposal of this product.

WaRning

To reduce the risk of electric shock, do not expose this apparatus to rain or moisture. Ensure that the apparatus is not exposed to splashing and that no objects ﬁlled with liquids, such as vases, are placed on the apparatus.

caution

Do not oPen

RiSk oF electRic Shock

caution: To reduce the risk of electric shock, do not remove any cover. No user serviceable parts inside. Refer servicing to qualiﬁed personnel only.

The lighting ﬂash with arrowhead symbol within the equilateral triangle is intended to alert the user to the presence of un-insulated “dangerous voltage” within the product enclosure that may be signiﬁcant enough to constitute a risk of electric shock.

The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operation and maintance (servicing) instructions in the literature accompanying this appliance.

caution

To prevent electric shock, do not use this polarized plug with an extension cord, receptacle, or other outlet unless the blades can be fully inserted to prevent blade exposure.

RM.416 specifications

The Stanton RM.416 is a robust and versatile loudspeaker system renowned in the professional audio industry for its exceptional sound quality and reliability. Designed for a variety of applications including live sound, installations, and events, the RM.416 integrates cutting-edge technologies that ensure superior performance.

One of the primary features of the Stanton RM.416 is its impressive power handling capability. With a peak power of 1600 watts, the speaker can deliver clear, powerful audio, making it suitable for both small and large venues. This capacity allows it to handle dynamic audio signals without distortion, which is crucial in environments where clarity and precision are key.

The RM.416 is equipped with a custom-designed 15-inch woofer that provides deep, resonant bass. This driver is optimized for low-frequency response, ensuring that bass notes are delivered with strength and clarity. In addition to the woofer, the speaker features a high-frequency compression driver that is paired with a precision horn. This design enhances the high-frequency response, resulting in clear, articulate highs that cut through the mix.

Another notable characteristic of the RM.416 is its rugged construction. Built with a durable plywood enclosure, the speaker is designed to withstand the rigors of touring and professional use. Its sturdy design not only protects the internal components but also contributes to the overall acoustic performance of the speaker. The exterior is often coated with a durable finish, enhancing its aesthetic while providing additional protection against wear and tear.

Connectivity is made simple with the RM.416, which is equipped with multiple input options, including XLR and ¼-inch inputs. This versatility allows for easy integration into various audio setups, accommodating different mixers and audio sources. Additionally, the speaker features provisions for daisy chaining, enabling users to connect multiple units together for larger sound setups.

Finally, the RM.416's design incorporates advanced acoustic technologies that enhance sound diffusion and distribution. Its wide dispersion pattern ensures that sound is evenly distributed throughout the space, minimizing dead spots and providing a coherent listening experience for audiences.

In summary, the Stanton RM.416 stands out as a high-performance loudspeaker system that combines powerful sound, robust construction, and user-friendly connectivity. Ideal for both live sound applications and permanent installations, it offers professional audio engineers an reliable solution for demanding environments.