Specifications
Audio
Continuous Amplifier Power 100 watts/channel
Total Harmonic Distortion
<0.05% at rated power
Intermodulation Distortion (60 Hz:7 kHz) <0.05% at rated power
Frequency Response
Line Level: 10 Hz - 70 kHz, ±3 dB
Phono: 20 Hz - 20 kHz, ±1 dB
Signal to Noise Ratio (IHF “A” weighted) Line Level: 92 dB
Phono: 74 dB
Input Overload
Line Inputs: 5 V
Phono Inputs: >120 mV
Preamplifier Output Voltage
1.0 V (200 mV Input)
Input Sensitivity/Impedance
Line Level: 200 mV/47 kohms
Phono: 2.5 mV/47 kohms
Tone Controls (Bass/Treble)
±8 dB at 100 Hz/10 kHz
Video
Frequency Response
3
Signal to Noise Ratio 45 dB
Input Impedance 75 ohms
Output Impedance
75 ohms
Output Level 1 volt
25
FM Tuner
Usable Sensitivity 14.2 dBf
50dB Quieting Sensitivity
20.2dBf (mono)
45.3dBf (stereo)
Signal to Noise Ratio (at 65 dBf) 70 dBf (mono)
65 dBf (stereo)
Harmonic Distortion (at 65 dBf) 0.3% (mono)
0.5% (stereo)
Frequency Response
30
Capture Ratio 2.0 dB
Alternate Channel Selectivity 47 dB (±400 kHz)
Spurious Response Ratio 80 dB
Image Response Ratio 65 dB
IF Response Ratio 80 dB
AM Suppression Ratio 52 dB
Stereo Separation (100Hz/1 kHz/10 kHz): 40 dB/45 dB/35 dB
Output level 850 mV
Antenna Input
75 ohms unbalanced
English
AM Tuner
Sensitivity
500 µV/m
Selectivity
25 dB
Image Response Ratio 35 dB
Signal to Noise Ratio 40 dB
Output level 250 mV
Antenna Input
Loop Antenna
General
Power Consumption 300 watts
28.4watts (idle)
13.2watts (standby)
Power Requirements (AC)
120 volts, 60 Hz (USA version)
230 volts, 50 Hz (European version)
Weight
10.8 Kg/30.4 lb.
Dimensions (W x H x D)
432 x 121 x 359 mm 17” x 43/4” x 141/8”
Front Panel Height
(feet removed/for rack mount)
109 mm / 4.3”
All specifications are accurate at the time of print- ing. Rotel reserves the right to make improve- ments without notice.
Rotel and the Rotel HiFi logo are registered trade- marks of The Rotel Co, Ltd., Tokyo, Japan.