MS30H/MS30E MIXER —TRAILER SAFETY GUIDELINES
Tires/Wheels/Lug Nuts
Tires and wheels are a very important and critical compo- nents of the trailer. When specifying or replacing the trailer wheels it is important the wheels, tires, and axle are prop- erly matched.
CAUTION :
DO NOT attempt to repair or modify a wheel. DO NOT install an
air pressure in the
Tires Wear/Inflation
Tire inflation pressure is the most important factor in tire life. Pressure should be checked cold before operation. DO NOT bleed air from tires when they are hot. Check inflation pressure weekly during use to insure the maxi- mum tire life and tread wear.
Table 5 (Tire Wear Troubleshooting) will help pinpoint the causes and solutions of tire wear problems.
Suspension
The rigid type axle and associated hardware (Figure 7) should be periodically inspected for signs of excessive wear, elon- gation of bolt holes, and loosening of fasteners. Replace all damaged parts immediately.
Figure 7. Axle Support Components
ALWAYS wear safety glasses when removing or installing force fitted
NOTE parts. Failure to comply may result
in serious injury.
PAGE 20 — MQ STOW MS30H/MS30E MIXER — PARTS & OPERATION MANUAL — REV. #4 (08/10/06)