
VS106_VS107_VS108_07EM1.qxd 10/11/07 19:42 Page 5
KNOW YOUR SEAL-A-MEAL® VACUUM FOOD STORAGE SYSTEM
|
| |
Light | Open/Cancel Button | Sealing Indicator |
| Light | |
|
|
Upper Sealing
Gasket
Accessory Port
Sealing Strip
Lower Sealing
Gasket
Removable Drip
Tray
Accessory Hose
Accessory Hose Adapter
PREPARING YOUR
Carefully unpack your
Clean all parts according to the CARE AND CLEANING section in this manual before first use.
HOW TO MAKE CUSTOM SIZED BAGS
1.Pull enough bag material to hold item to be vacuum packaged, plus 3 inches. With a pair of scissors, cut desired bag length from Bag Roll. Make sure to cut in a straight line. Plug in Power Cord.
2.Open the Lid. Place one end of cut bag between Sealing Strip and Lower Sealing Gasket.
DO NOT place open end of bag in the Drip Tray.
3.Close Lid. Position hands on both sides of the Lid. Press firmly on both sides of the Lid and hold until the motor starts.
NOTE: Sealer will not operate if Lid is not properly closed.
4.Continue to hold the Lid. When the
5.When the motor stops and the Sealing indicator light is no longer illuminated, press the Open/Cancel button.
6. The custom sized bag is ready for vacuum sealing.
NOTE: The Open/Cancel button can also be used to cancel the process
CAUTION: This sealer is not for commercial use. If sealing more than 30 bags or canisters in a row, wait at least 25 minutes before continuing to use your vacuum food sealer.
CAUTION: The unit has a cool down period between cycles. Wait 20 seconds before using again.