Saeco Coffee Makers 104342 Troubleshooting, Machine Actions Causes Solutions, Ration, See note

Page 22

TROUBLESHOOTING

Machine Actions

Causes

Solutions

The machine does not turn on.

The machine is not connected to the power

Connect the machine to the power source.

 

source.

 

The coffee is not hot enough.

The cups are cold.

Warm the cups with hot water.

No hot water or steam is dispensed.

The hole of the steam wand is clogged.

Clean the hole of the steam wand using a pin.

 

Make sure that the machine is turned off

 

and has cooled before performing this ope-

 

ration.

Pannarello is dirty (if supplied).

Clean the Pannarello.

The coffee has little crema.

The coffee blend is unsuitable, the coffee is not

Change coffee blend or adjust the grind as explained

(see note)

freshly roasted or the grind is too coarse.

in the “Coffee Grinder Adjustment”section.

The machine takes a long time to warm up or the amount of water dispensed from the wand is too little.

The machine circuit is obstructed by limescale Descale the machine. build-up.

The brew group does not come out.

The brew group is out of place.

Turn the machine on. Close the service door and insert the coffee grounds drawer. The brew group automatically returns to the initial position.

Dregdrawer is inserted.

Remove the dregdrawer first, then the brew

 

group.

The machine grinds the coff ee beans but no coffee comes out.

(see note)

Water tank is empty.

Fill the water tank and prime the circuit (section

 

“Using the Machine for the First Time”).

Brew group is dirty.

Clean the brew group (section “Brew Group”).

Circuit is not primed.

Prime the circuit (section “Using the Machine for

 

the First Time”).

 

Rare event that occurs when the machine is auto-

Brew a few coff ees as described in section “Saeco

 

matically adjusting the dose.

Adapting System”.

 

The dispensing head is dirty.

Clean the dispensing head.

 

 

 

The coffee is too weak.

Rare event that occurs when the machine is auto-

Brew a few coff ees as described in section “Saeco

(see note)

matically adjusting the dose.

Adapting System”.

Coffee is brewed slowly.

The coffee grind is too fi ne.

(see note)

Change coffee blend or adjust the grind as ex- plained in the “Coffee Grinder Adjustment” sec- tion.

The circuit is not primed.

Prime the circuit (section “Using the Machine for the First Time”).

 

The brew group is dirty.

Clean the brew group (section “Brew Group”).

Coffee leaks out of the dispensing head.

The dispensing head is clogged.

Clean the dispensing head and its holes.

Note: These problems can be considered normal if the coffee blend has been changed or if the machine has just been installed. In this case wait until the machine performs a self-adjusting operation as described in section “Saeco Adapting System”.

Please contact Saeco Customer Service or an authorized service center for any problems not covered in the above table or when the suggested solutions do not solve the problem.

• 22 •

Page 21 Page 23
Image 22
Page 21 Page 23
Contents SUP 037R Important Safeguards Instructions for the Power Supply Cord For the Safety of Others Safety RegulationsPower Supply Power Cord General InformationFire Safety Precautions Storing the Machine CleaningServicing / Maintenance Never attempt to operate a faulty machineLong coffee light button Selector switchCoffee bean hopper STAND-BYlight buttonMachine Packaging InstallationPreliminary Operations Circuit Priming Press the button to brew a long cof- fee Rinse/Self-cleaning CycleTo the position Wait for the cycle to fi nish automaticallyIntenza water filter op- tional AdjustmentsCoffee Grinder Adjustment Saeco Adapting SystemCoffee Brewing Adjusting the Coffee LengthStand-by Aroma Adjustment Dispensing Spout AdjustmentUsing Coffee Beans AutomaticallyCoffees Dispensing HOT WaterTed coffee Bare handsNed and free of any milk residue Dispensing hot waterOccasionally, after turning Water in the steam wandStraight after If supplied to obtain a thorough cleaningTenance Needed to dispense coffeeReassemble the external part Pannarello At authorised service centresBrew Group Fill the water tank with fresh drinking waterPerfect working order Adding the descaling solutionDescaling Descaling processPannarello, if supplied At the end, fi ll the water tank againRemarks on Descaling Maintenance sectionAnd/or regulations in force in the country of use Ready Signals Control Panel DisplayFast Blinking Slow BlinkingRation TroubleshootingMachine Actions Causes Solutions See notePacking materials can be recycled Technical SpecificationsMachine Disposal This product complies with eu directive 2002/96/ecType HD8833 Cod.15002520 Rev.00 del

104342 specifications

The Saeco Coffee Maker 104342 is an innovative machine designed for coffee enthusiasts who seek convenience and quality in their brewing experience. With state-of-the-art features, this coffee maker brings a touch of luxury to homes and offices alike.

One of the standout characteristics of the Saeco 104342 is its fully automatic operation. This machine takes coffee-making to the next level, allowing users to prepare a fresh cup of espresso or coffee at the touch of a button. The integrated grinder is a key feature, utilizing ceramic burrs that provide a consistent grind while maintaining the flavor integrity of the beans. This ensures that every cup brewed is rich and aromatic.

Another hallmark of the Saeco 104342 is its advanced brewing technology, which includes a customizable brew strength selector. Users can choose between different strength settings, making it easy to brew everything from a mild morning cup to a robust afternoon pick-me-up. This adaptability caters to varying taste preferences and ensures that every coffee moment can be enjoyed to the fullest.

The machine also features a user-friendly, intuitive interface. The clear display and simple navigation allow users of all skill levels to operate the coffee maker efficiently. With programmable options, users can set the desired brew temperature, adjust the coffee volume, and even save their favorite settings for future use.

In terms of maintenance, the Saeco 104342 stands out with its easy-to-clean components. The removable brewing unit and drip tray simplify the cleaning process, making it hassle-free to maintain the machine in pristine condition. Additionally, the automatic cleaning cycle minimizes the effort needed to keep the machine functioning optimally.

With a sleek and modern design, the Saeco Coffee Maker 104342 seamlessly fits into any kitchen decor. Its compact size does not compromise on functionality, making it a perfect addition to both small and large spaces.

In summary, the Saeco Coffee Maker 104342 combines advanced brewing technology, user-friendly features, and an elegant design, making it an excellent choice for coffee lovers seeking quality and convenience. Whether it’s for a morning ritual or an afternoon break, this machine ensures that each cup is a delightful experience.
Top Page Image Contents