Saeco Coffee Makers 104342 manual Dispensing hot water, Occasionally, after turning

Page 14

• Turn the selector switch clockwise to set it to the “”position.

Note: The lights that indica- te the aroma are off when

dispensing hot water.

• Fill the cup with hot water to the desi-

red level; to stop hot water dispensing,

turn selector switch counter-clockwise

back to the “ ” position. The machine

returns to the normal operating

mode.

Blinking

Occasionally, after turning

 

the selector switch, hot water

 

may not be dispensed and the but-

 

tons will start blinking. Simply wait

 

until the end of the warm-up phase

 

so that hot water can be dispensed

 

from the Pannarello.

ned and free of any milk residue.

To prepare your cappuccino, we recommend discharging

the water in the steam wand.

To discharge the water in the steam wand, place a container under the steam wand (Pannarello, if supplied).

• When the machine is ready to brew

coff ee, turn selector switch counter-

clockwise to set it onto the “

”po-

sition. Residual water may come out

of the steam wand (Pannarello, if

supplied).

 

STEAM DISPENSING / PREPARING A CAPPUC CINO

Steam may be used to froth milk for a cappuccino, as well as to reheat other beverages.

Blinking

The“” and “”lights blink during the preheating time required by the machine.

Note: The lights that indica- te the aroma are off when

dispensing steam.

Danger of scalding! Brewing may be preceded by small jets of hot water. The steam wand may reach high temperatures. Never

touch it with bare hands.

Important note: immediately after using the steam to froth the milk, clean the steam wand (or

Pannarello when provided). When the machine is ready, brew a small amount of hot water in a glass and clean the steam wand (or Pannarello when provided) externally. In this way, all parts will be perfectly clea-

• 14 •

Steady on

• Steam dispensing will begin when the

 

buttons“

” and “

”are displayed

 

steady on; soon after, only steam will

 

begin to come out.

 

• Turn the selector switch clockwise and set it back to the “”position to stop dispensing steam.

Image 14
Contents SUP 037R Important Safeguards Instructions for the Power Supply Cord For the Safety of Others Safety RegulationsPower Supply Power Cord General InformationFire Safety Precautions Storing the Machine CleaningServicing / Maintenance Never attempt to operate a faulty machineLong coffee light button Selector switchCoffee bean hopper STAND-BYlight buttonPreliminary Operations InstallationMachine Packaging Circuit Priming Press the button to brew a long cof- fee Rinse/Self-cleaning CycleTo the position Wait for the cycle to fi nish automaticallyIntenza water filter op- tional AdjustmentsCoffee Grinder Adjustment Saeco Adapting SystemStand-by Adjusting the Coffee LengthCoffee Brewing Aroma Adjustment Dispensing Spout AdjustmentUsing Coffee Beans AutomaticallyCoffees Dispensing HOT WaterTed coffee Bare handsNed and free of any milk residue Dispensing hot waterOccasionally, after turning Water in the steam wandStraight after If supplied to obtain a thorough cleaningTenance Needed to dispense coffeeReassemble the external part Pannarello At authorised service centresBrew Group Fill the water tank with fresh drinking waterPerfect working order Adding the descaling solutionDescaling Descaling processPannarello, if supplied At the end, fi ll the water tank againAnd/or regulations in force in the country of use Maintenance sectionRemarks on Descaling Ready Signals Control Panel DisplayFast Blinking Slow BlinkingRation TroubleshootingMachine Actions Causes Solutions See notePacking materials can be recycled Technical SpecificationsMachine Disposal This product complies with eu directive 2002/96/ecType HD8833 Cod.15002520 Rev.00 del

104342 specifications

The Saeco Coffee Maker 104342 is an innovative machine designed for coffee enthusiasts who seek convenience and quality in their brewing experience. With state-of-the-art features, this coffee maker brings a touch of luxury to homes and offices alike.

One of the standout characteristics of the Saeco 104342 is its fully automatic operation. This machine takes coffee-making to the next level, allowing users to prepare a fresh cup of espresso or coffee at the touch of a button. The integrated grinder is a key feature, utilizing ceramic burrs that provide a consistent grind while maintaining the flavor integrity of the beans. This ensures that every cup brewed is rich and aromatic.

Another hallmark of the Saeco 104342 is its advanced brewing technology, which includes a customizable brew strength selector. Users can choose between different strength settings, making it easy to brew everything from a mild morning cup to a robust afternoon pick-me-up. This adaptability caters to varying taste preferences and ensures that every coffee moment can be enjoyed to the fullest.

The machine also features a user-friendly, intuitive interface. The clear display and simple navigation allow users of all skill levels to operate the coffee maker efficiently. With programmable options, users can set the desired brew temperature, adjust the coffee volume, and even save their favorite settings for future use.

In terms of maintenance, the Saeco 104342 stands out with its easy-to-clean components. The removable brewing unit and drip tray simplify the cleaning process, making it hassle-free to maintain the machine in pristine condition. Additionally, the automatic cleaning cycle minimizes the effort needed to keep the machine functioning optimally.

With a sleek and modern design, the Saeco Coffee Maker 104342 seamlessly fits into any kitchen decor. Its compact size does not compromise on functionality, making it a perfect addition to both small and large spaces.

In summary, the Saeco Coffee Maker 104342 combines advanced brewing technology, user-friendly features, and an elegant design, making it an excellent choice for coffee lovers seeking quality and convenience. Whether it’s for a morning ritual or an afternoon break, this machine ensures that each cup is a delightful experience.