Saeco Coffee Makers HD8966 manual Adjusting the Dispensing Spout

Page 36

34ENGLISH

Adjusting the Dispensing Spout

The height of the dispensing spout can be adjusted to better fit the dimen- sions of the cups that you wish to use.

Move the dispensing spout up or down with your fingers to adjust its height as shown in the image.

The recommended positions are:

For the use of small cups.

For the use of large cups.

For the use of glasses for the Latte Macchiato.

Note:

This is possible by moving the dispensing spout towards the machine.

Two cups can be placed under the dispensing spout to brew two coffees at the same time.

Image 36
Contents 02 EN Important Safeguards Instructions for the Power Supply Cord Contents English Safety Instructions English Always put the machine on a fl at and stable surface Compliance with Standards Installation 1c 2 1bGeneral Description Machine Installation Preparing for USEMachine Packaging Put the lid back on the coffee bean hopper Using the Machine for the First Time Language SelectionAutomatic Rinse/Cleaning Cycle Manual Rinse Cycle Press the buttonInsert Preground Coffee Press OK English Measuring and Programming Water Hardness Coffee Profiles Maintenance Settings Statistics INTENZA+Water Filter Installation Activate FILTER? Place a container under the hot water dispensing spout Replacing the INTENZA+Water Filter Changing Coffee Beans Removing the Coffee Bean HopperInserting the Coffee Bean Hopper English Coffee Emptying Cycle Machine performs a grinding cycle without brewing coffee Profile Selection Adjustments Coffee ProfileEnabling a New Profile Disabling a User Profile Arabica User Enable Profile Disable Profile Adjusting the Ceramic Coffee Grinder Saeco Adapting SystemAdjusting the Aroma Coffee Strength Adjusting the Dispensing Spout Adjusting the Coffee Quantity Coffee Brewing Using Coffee Beans Brewing CoffeeCoffee Brewing Using Pre-Ground Coffee Press the button to enter the aroma selection menuInsert Preground Coffe Press OK Milk Carafe Filling the Milk CarafeInserting the Milk Carafe Removing the Milk CarafeEmptying the Milk Carafe Brewing MILK-BASED Beverages Cappuccino Insert the Carafe With the Spout Open Cappuccino Adjusting the Milk-Based Product Length English Special Beverages Hot WaterEnglish Adjusting the Hot Water Dispensing Special Beverages Menu for Brewing Other Beverages HOT Water Ristretto Espresso Mild Espresso Intense Memo Beverage Programming Temperature AromaCoffee Quantity Taste Milk QuantityHOT Water Programming Water QuantityRestoring Beverage Parameters To confirmMachine Programming ButtonLanguage Settings Stand-by SettingsFactory Settings StatisticsMaintenance Brew Group Cleaning CycleDescaling Cleaning of the Carafe Coffee Circuit CleaningCleaning and Maintenance Daily Cleaning of the MachineEnglish Daily Cleaning of the Water Tank Daily Cleaning of the Milk CarafeEnglish Frothed Milk Insert the Carafe With the Spout Open Weekly Cleaning of the Machine Weekly Cleaning of the Milk CarafeEnglish Weekly Cleaning of the Brew Group Do not use detergent or soap to clean the brew group English Monthly Cleaning of the Milk Carafe Start Carafe WASHING? Never drink the solution dispensed during this step Fill Carafe With Fresh Water Monthly Lubrication of the Brew Group Monthly Cleaning of the Brew Group with Coffee Oil Remover Press the button to select Maintenance Press to confirm Place a Container Under Dispensing Spout English Descaling Empty the drip tray internal / external Press the button Pause English Displayed message Meaning of the message Display MessagesSpout open Troubleshooting Machine actions CausesMachine actions Causes Solutions Been shifted Energy Saving Stand-byDisposal Technical Specifications Warranty and ServiceWarranty ServiceOrdering Maintenance Products Machine Accessories 02 IT
Related manuals
Manual 96 pages 1.6 Kb