Saeco Coffee Makers HD8836, HD8837 manual Descaling

DESCALING

Limescale normally builds up with the use of the appliance.

The display informs you when descaling is necessary:

Orange

Do not turn the machine off or put it in stand-by mode

during the descaling process.

Use the Saeco descaling product only. Its formula has been designed to ensure better

performance and operation for the machine's entire working life. A correct use of the solution also avoids alterations in the brewed product.

Warning! Never drink the descaling solution or any products dispensed until the cycle is complete. Never use vinegar as a

descaling solution.

Before descaling the machine, perform the following operations:

- remove the Pannarello (if supplied) from the steam wand as described in the "Cleaning and Maintenance" chapter;

- empty the drip tray. Place it back in the machine before proceeding.

• If the machine is off, turn it on by pressing the ON/OFF button. Wait for the machine to complete the rinse

	and warm-up process.
	Wa r n i n g ! R e m ove t h e
	"Intenza" filter before adding
the descaling solution.
•	Hold the “	” button pressed for 5
	seconds. The display will show the icon
	on the side.
Red
	If you press the“		”button
	by mistake, press the “
” to quit.
•	Press the "	" button to confi rm the
	activation of the descaling cycle.
	From now on, descaling cycle
	must be fully completed.
	Note: should the containers
	fill up, temporarily suspend
the dispensing process in order to
empty the containers.
If descaling solution and/or water
spills out of the dispensing spout:
PAUSE: turn the selector dial to the
"	" position;
START: turn the selector dial to the
"	" position.

•Place a large container under the dispensing spout.

If descaling solution and/or water spills out of the steam wand: PAUSE: turn the selector dial to the "" position;

START: turn the selector dial to the "" position.

• 18 •