Saeco Coffee Makers HD8836, HD8837 manual Priming the Water Circuit, Be primed

Page 8

Black

Switch the power button to “I” to turn on the machine.

The display shows the ON/OFF icon.

Make sure the selector dial is set to the

” position; if this is not the case, set it to that position.

Press the ON/OFF button to turn the machine on.

Red

Priming the Water Circuit

• To prime the water circuit, place a

container under the steam/hot water

wand (Pannarello, if supplied).

• Turn the selector dial clockwise to set

it to the “

” position. The machine

starts the automatic priming of the

circuit by letting out a preset quantity

of water through the steam/hot water

wand (Pannarello, if supplied). The bar

under the icon shows the operation

progress.

 

At the end of the priming process,

the display shows an icon (see fig-

ure) indicating that the selection dial

must be brought back to the central

“ ”position.

 

The display indicates that the circuit must be primed.

Red

 

Note: Before starting the

 

 

 

machine after long periods

 

 

of inactivity, the water circuit must

 

 

be primed.

Orange

Orange

Green

• The display then shows the machine

warm-up icon, as shown in the fi gure.

When warm-up is complete, the machine performs a rinse

cycle of the internal circuits.

In this phase, this icon will be dis- played:

When the operations described above are complete, this icon will be dis- played:

The machine is then ready to brew beverages.

To brew coffee, dispense hot water or steam, and for a proper use of the ma- chine, carefully follow the instructions provided.

If the machine is being used for the first time or after a long period of inactivity, follow the

operations described in the follow- ing section.

• 8 •

Image 8
Contents 02 EN Important Safeguards Instructions for the Power Supply Cord Safety Regulations Power Supply Power CordFor the Safety of Others General InformationStoring the Machine Cleaning Servicing / MaintenanceFire Safety Precautions Sing spoutON/OFF button Selector buttonPreliminary Operations InstallationMachine Packaging Operations described in the follow- ing section Priming the Water CircuitBe primed Rinse/Self-Cleaning Cycle Following icon will be displayedMore times Press the button to brew a long cof- feeMachine water hardness setting Water hardness measurementIntenza Water Filter Fill the water tank againSaeco Adapting System AdjustmentsCoffee Grinder Adjustment Coffee Brewing Stand-ByDispensing Spout Adjust- ment Aroma AdjustmentUsing Coffee Beans For use with big cupsUsing Pre-Ground Coffee Dispensing HOT WaterDevelop fully Ated coffeePensed from the Pannarello Bare handsTurn the selector dial clockwise CappuccinoCleaning Maintenance Pannarello, if supplied to obtain a thorough cleaningStraight after Needed to dispense coffeeIt is recommended to clean the water tank daily Service centresBrew Group Fill the water tank with fresh drinking waterDescaling Place the tank in the coffee machine Machine performs a fast rinse cycle SpoutCycle PositionWhen inserting the water tank again At the beginning of the cycle can be installed backRemove the descaling liquids from the drip tray And/or the regulations in force in the country of useProgramming commands Exit programming modeProgramming Enter the menuMent section FunctionsProgramming example Control Panel Display Ready SignalsProgramming mode Alarm Signals Its endSee note TroubleshootingMachine Actions Causes Solutions Technical Specifications Machine DisposalRev.00 del

HD8837, HD8836 specifications

The Saeco Coffee Makers HD8836 and HD8837 are innovative espresso machines designed to cater to coffee aficionados who appreciate quality and convenience in their brewing experience. With a sleek design and advanced technology, these models stand out as excellent additions to any kitchen countertop.

One of the main features of the HD8836 and HD8837 is their fully automatic brewing system. This allows users to enjoy authentic espresso with just the push of a button. Both models utilize a powerful 15-bar pressure pump, ensuring rich and flavorful coffee extraction. The machines are equipped with an integrated coffee grinder that utilizes ceramic grinding technology, which is known for its durability and ability to produce consistent grounds while preserving the natural flavors of the coffee beans. Users can adjust the grind settings to suit their taste, ensuring a personalized brewing experience.

Another notable characteristic is the one-touch function that allows for the preparation of various coffee specialties, including espresso, cappuccino, and latte macchiato, all in one convenient operation. The milk carafe is detachable, making it easy to clean and store. With automatic frothing capabilities, these machines create creamy and velvety milk froth, perfect for crafting café-quality beverages at home.

Temperature control is crucial for brewing the perfect coffee, and the Saeco HD8836 and HD8837 excel in this aspect. They feature integrated temperature control systems that maintain optimal brewing temperatures. Additionally, the machines come with a customizable coffee strength setting, enabling users to choose between mild, medium, or strong brews according to personal preference.

Maintenance is made easy with the AquaClean water filter, which extends the lifespan of the machine and enhances the taste of the coffee. This filter reduces limescale buildup and ensures that users can brew up to 5,000 cups without the need for descaling. The machines also feature a user-friendly display that guides users through the various settings, and an intuitive interface for seamless operation.

Ultimately, the Saeco Coffee Makers HD8836 and HD8837 embody the perfect blend of technology, design, and functionality. They offer coffee lovers a reliable and enjoyable automatic brewing experience, making them a valuable asset for any home barista. With their advanced features and user-friendly interface, these coffee makers invite users to savor their favorite brews, day after day.