Pioneer AVH-P4000DVD operation manual Error messages, Problems during iPod playback

Appendix

Additional Information

Problems during iPod playback

Symptom	Cause	Action
iPod doesn’t operate correctly.	Cables are incorrectly connected.	Disconnect the cable from iPod. Once iPod
		main menu is displayed, connect the cable
		again.
		Reset the iPod.
	The iPod version is old.	Update the iPod version.

Problems during multi-channel processor connection

Symptom	Cause	Action (See)
No sounds are heard.	Optical cables are not connected	Connect the cables correctly.
The volume level will not rise.	correctly.
Even if multi-channel audio is	Digital output setting is set to Line- Normally, set the digital output setting to
selected, 2-channel audio is out-	ar PCM.	STREAM. (Page 38)
put.

Error messages

When you contact your dealer or your nearest Pioneer Service Center, be sure to have the error message recorded.

Built-in DVD player

Message	Cause	Action
DIFFERENT REGION DISC	The disc does not have the same re-	Replace the DVD video with one bearing the
	gion number as this unit	correct region number.
ERROR-02-XX	Dirty disc	Clean disc.
	Scratched disc	Replace disc.
	The disc is loaded upside down	Check that the disc is loaded correctly.
	Electrical or mechanical	Press RESET.
NON-PLAYABLE DISC	This type of disc cannot be played	Replace the disc with one this unit can play.
	by this unit
	The inserted disc does not contain	Replace disc.
	any files that can be played back
PROTECT	All the files on the inserted disc are	Replace disc.
	secured by DRM
SKIPPED	The inserted disc contains WMA	Replace disc.
	files that are protected by DRM
TEMP	The temperature of this unit is out-	Wait until the unit’s temperature returns to
	side the normal operating range	within normal operating limits.

Additional Information

En 83