Switchingthe auxiliary 1 setting

%TouchAUX1 on the initial menu to se-
lectdesired setting.
!VIDEO–an iPod with video capabilities
connectedwith 4-pole mini plug cable (e.g.,
CD-V150M)
!AUDIO–auxiliary device connected with
stereomini plug cable
!OFF–No auxiliary device is connected

Switchingthe auxiliary 2 setting

%TouchAUX2 on the initial menu to turn
auxiliary2 setting on.
#Toturn auxiliary 2 setting off, touch AUX2
again.
Setting the rear output andsubwoofercontroller
Thisunit’s rear output (rear speaker leads out-
putand RCA rear output) can be used for full-
rangespeaker (FULL) or subwoofer (S.W) con-
nection.If you switch the rear outputsetting
toS.W, you can connect a rear speaker lead
directlyto a subwoofer without using an auxili-
aryamp.
Initially,the unit is set for rear full-range speak-
erconnection (FULL). When rear output is
connectedto full range speakers (when FULL
isselected), you can connect other full range
speakers(REAR) or a subwoofer (S.W) to the
RCArear output.
!Whenthe multi-channel processor (e.g.,
DEQ-P8000)is connected to this unit, you
cannotoperate this function.
1 TouchREAR SP on the initial menu.
2 Touchcor dnext to REAR SP to switch
therear output setting.
Touchcto select full-range speaker and FULL
appearsin the display. Touch dto select sub-
wooferand S.W appears in the display.
#Whenno subwoofer is connected to the rear
output,select FULL (full-range speaker).
#Whena subwoofer is connected to the rear
output,select S.W (subwoofer).
#Whenthe rear output setting is S.W, you can-
notoperate the following procedure.
3 Touchcor dnext to PREOUT to switch
thesubwoofer output or rear output.
Touchingcor dwill switch between S.W and
REARand that status will be displayed.
Notes
!Evenif you change this setting, there is no
outputunless you turn the subwoofer output
on(refer to Using subwoofer output on page
33).
!Ifyou change this setting, subwoofer output
inthe audio menu return to the factory set-
tings.
!Bothrear speaker lead outputs and RCA rear
outputare switched simultaneously in this
setting.
Changing languages for CAUTION
Someoperations on this unit are prohibited
whiledriving or needs to be paid a careful at-
tentionwhen operating. In such case, a cau-
tionappears on the display. You can change
thelanguage of the cautions at this setting.
%TouchCAUTION LANGUAGE on the in-
itialmenu to select yourdesired language.
Eachtime you touch CAUTION LANGUAGE it
selectslanguages for CAUTION in the follow-
ingorder:
ENGLISH—ESPAÑOL—FRANÇAIS
Switching the sound muting/attenuation
Soundfrom this system is muted or attenu-
atedautomatically when the signal from the
equipmentwith mute function is received.
!Soundfrom this system returns to normal
whenthe muting or attenuation is can-
celed.
%TouchTEL to select any of the muting,
attenuationor off.
TouchTEL until the desired setting appears in
thedisplay.
!MUTE–Muting
!ATT-20dB–Attenuation (ATT -20dB has a
strongereffect than ATT-10dB)
!ATT-10dB–Attenuation
Operating this unit
En 39
Section
03
Operatingthis unit