20INSTALLATION / CIRCUIT LOADING
The messages displayed by the machine during operation are shown on pg.28.
Important warning for using the “Aqua Prima Filter” can be found at page 28.
Check that all components | Fill the coffee bean container |
are correctly placed. | with coffee beans. |
The “Aqua Prima” fi lter can be installed (see pg.27).
Fill the tank with fresh drin- king water.
See rating plate
Insert the plug into a sui- table electric socket.
Move the ON/OFF switch | The machine is warming | Place a container beneath |
to “I” to turn on the | up; lights are fl ashing. | the steam tube. |
machine. |
|
|
Turn the knob clockwise | Remove the container. | When lights remain steadily |
to terminate the circuit- |
| lit, the machine is ready |
loading process. |
| for use. |
Turn the knob countercloc- | Wait until a steady stream |
kwise to start loading the | of water fl ows out from the |
circuit. | nozzle. |
Note: You must load the circuit before starting up the machine for the first time, if it has been inoperative for a lengthy period or if the water tank has been completely emptied. The circuit must be also loaded each time the light is steadily lit:
Check the dater on “Aqua Prima” filter; if filter is past its date, replace it with a new one.