Rondo SUP021YO manual Aqua Prima Cartridge Filter, Installation

Page 13

“AQUA PRIMA” CARTRIDGE FILTER 27

The filter must be replaced when signalled by the machine, see page 28.

Before descaling, remove the filter from the tank.

INSTALLATION

Remove the fi lter from the

Adjust the dater to the

Insert the applicator and

packing container.

current month.

turn it clockwise to secure

 

 

it to the fi lter.

Check where the fi lter positioning and reference mark is.

Put the fi lter into the empty tank.

ENGLISH

The reference must be positioned in correspon- dence with the groove.

Open the knob and dispen- se water.

Press until the end limit.

Turn the applicator coun-

 

ter-clockwise and remove

 

it from the tank.

Empty the water tank out at

When the tank is empty, fi ll

intervals.

it again with fresh drinkable

 

water.

Fill the tank with fresh drinkable water.

Press the button. When the light fl ashes, release the button.

Position a container ben- eath the steam tube and turn the machine on.

It is possible to use the machine without fi lter, Saeco suggests its use. If fi lter is not used, the machine must be descaled more frequently.

You can now use your coffee machine.

Image 13
Contents For Household USE only Important Safeguards General Information Technical SpecificationsSafety Rules Aqua Prima filter alarm reset Installation / Circuit Loading SBS AdjustmentsCoffee Beans 1 Coffee Coffee Dispensing / HOT WaterCoffee Beans 2 Coffees HOT WaterCappuccino CappuccinoSteam SteamTank Check Whether the tank is Empty. B DescalingBasic Cleaning and MaintenanceBrew Group Aqua Prima Cartridge Filter InstallationDisplay Messages Notes on the Aqua Prima Cartridge Filter Remedies Problems Causes RemediesCod .6.589.64.00 Rev.02 del