OPERATING INSTRUCTIONS
A. PRECAUTIONS:
1. Do not use Soyabella to reheat cold pastes.
2. Do not dip the head unit into water or pour water into the top section.
3. Do not dip the
4. Be sure the Upper Plug and the Power Plug Receptacle are dry before connecting.
5. Unauthorized disassembly of the head will void the warranty.
6. Be careful with the grinding blade components when cleaning.
7. Do not touch the
8. The stainless steel chamber can get very hot during operation. Avoid touching the
10. Do not operate with a damaged power cable.
11. Always use a grounded outlet with the power plug.
B. MAKING SOYMILK:
Follow these instructions to make fresh soy milk, nut milk, or rice milk.
1.Soak soybeans: Use the measuring cup and take a full cup of dry soybeans (2.5oz – 3.5oz., 70g – 95g). Rinse soybeans thoroughly and leave to soak. •RECOMMENDATIONS: Soak the soybeans for 8 hours in spring and autumn, 10 hours in winter, and 6 hours in the summer.
•TIP: When soaking the beans, put beans directly into the milk screen and place the screen into the utility cup. Pour water into the utility cup to soak the beans and let it sit.
2.Add water to stainless steel chamber: Fill the
3.Load soybeans and attach the milk screen to the head unit: Drain the soybeans and load them into the milk screen. Attach the milk screen to the head unit by moving the blade in a
•CAUTION: BE SURE THE SCREEN IS PROPERLY LOCKED IN PLACE! If the screen becomes loose during operation, the spinning blade could damage the screen.
4.Assemble machine and make soybean milk: Connect the head unit to the stainless steel chamber. Make sure the upper plug slides into the upper plug receptacle on top of the handle. Plug the provided power cord into the power plug receptacle, and connect the other end to a wall socket. Once plugged in, the soymilk maker will beep and a red light will flash, indicating that the power is on. Choose the milk setting by pressing the "MILK" button on the head unit, and the red light will turn solid, indicating that the cycle is starting. The cycle will take approximately 15 minutes. When finished, the indicator light will blink green, and the machine will beep.
5.Pour milk and enjoy: Unplug the base unit. Lift the head unit from the stainless steel chamber. When removing the head unit, be careful not to touch the screen. It will be hot. Make sure that all the milk drains from the screen before moving the head unit away from the stainless steel chamber. Place the head unit with the screen still attached into the utility cup to cool. Carefully pour milk from the stainless steel chamber.
•CAUTION: Soymilk will be hot. Allow milk to cool before serving.
•TIP: Add your favorite ingredients to flavor your soymilk. Add a pinch of sea salt, or brown sugar, vanilla - any other flavors you like.
5 | 6 |