Sonance IW-1, IW-4, IW-2, IW-3, IW-5 instruction manual IPort Rear-Panel Connections, See Figure

Page 4
Figure 2:
iPort Utility Box Connections

•The iPort has angled screw mounting holes on both sides that allow it to be installed up against a stud. (See Installing The iPort In A Wall, on page 9.)

•Direct sunlight can interfere with IR operation. Avoid installation locations that are in direct sunlight a portion of the day.

iPort Rear-Panel Connections

See Figure 2

RJ-45 Video Connection: Connects to the iPort Video Wallplate by Cat5 cable. Transmits balanced or unbalanced NTSC video from iPod photo players to the Video Wallplate.

RJ-45 Audio Connection: Connects to the iPort Audio Wallplate via Cat5 cable. Transmits balanced or unbalanced audio to the Wallplate; receives IR from and transmits/receives RS-232 control data to and from the Balanced Audio Wallplate; receives +15V DC power

from the Wallplate.

Volume Control YES/NO switch: In the left (NO) position, audio is routed directly to the RJ-45 Audio Connection; in the right (YES) position, audio is routed in and out through the 5-Pin Screw Connector (see below).

5-Pin Screw Connector: Connects to an optional #70071 or #70072 Line-Level Volume Control, providing volume control in local-zone systems (see above).

4-Pin Screw Connector: Connects to the Aux Power connector on the Audio Wallplate. Allows the use of large-gauge wire to minimize power supply voltage loss in installations where the Wallplate is locat- ed more than 250 feet from the iPort.

Note: The 4-Pin connector has two parallel sets of Supplemental Power connections. You can use either set.

In addition to the above connections, the rear panel also has two RotoLock® clamps. When properly tightened, the RotoLock clamps hold the iPort firmly on the mount- ing surface. (See Installing the iPort in a Wall, page 9.)

iPor t ver. IW

4

Instruction Manual

Page 3 Page 5
Image 4
Page 3 Page 5
Contents IW-1 IW-2 IW-3 IW-4 IW-5 Introduction IPort System Components and CapabilitiesSelecting an Installation Location IPod Models SupportedIPort Rear-Panel Connections See FigureIW-1 & IW-2 Local-Zone System Connections IPort System Connections IW-1 / IW-2Unbalanced audio RJ-45 pin assignment is Cat5/RJ-45 Cable Wiring Volume control connector pin assignments areIPort System Connections IW-3 / IW-4 / IW-5 IW-3, IW-4 & IW-5 Long-Distance Balanced Audio ConnectionsBalanced Audio RJ-45 pin assignment is Balanced Video RJ-45 pin assignment isIW-3, IW-4 & IW-5 Auxiliary Power Connection PinIW-5 Balanced Video Connections Installing the iPort in a WallFor IW-5 Systems Adjusting the iPort for Different iPod Models Attaching the utility box to a wallAttaching the face to the utility box Important Never over-tighten the RotoLock screwsControlling the iPod in an iPort System Adjusting the iPort for different iPod modelsIR Control Notes RS-232 Control Notes Specifications Factory Default SettingsIPort Status Indicator IPort Status IndicationTechnical Assistance and Service Warranty Coverage U.S. only IPor t ver. IW 33-3873 05/06

IW-5, IW-2, IW-4, IW-1, IW-3 specifications

Sonance is renowned for its commitment to delivering high-fidelity audio solutions that seamlessly blend into any living space. Among its impressive lineup of in-wall speakers, the IW series stands out, particularly the IW-1, IW-2, IW-3, IW-4, and IW-5 models. Each speaker is designed to enhance home audio experiences while maintaining a discreet aesthetic.

The Sonance IW-1 is a compact in-wall speaker that prioritizes versatility. It features a 1-inch tweeter and a 5.25-inch mid/bass driver, which deliver crisp highs and robust mid-range frequencies. This model is particularly suitable for small to medium-sized rooms. The integration of Sonance's patented technology allows for easy installation and an impressive soundstage, ensuring that it doesn't compromise on performance despite its smaller size.

Moving to the IW-2, this model steps up with a larger 6.5-inch mid/bass driver, coupled with a 1-inch tweeter. This design provides enhanced low-frequency response, making it ideal for home theater systems. The IW-2 incorporates a unique tuning system that allows users to adjust the audio output to suit their specific environment, providing a tailored listening experience.

The IW-3 is designed for those who crave a more powerful output. Featuring dual 6.5-inch woofers and a 1-inch tweeter, the IW-3 ensures rich, cinematic audio quality and impressive bass response. Its robust build and quality materials contribute to its durability, making it an excellent choice for both residential and commercial spaces.

For audiophiles looking for an exceptional sound experience, the IW-4 offers even more sophistication. This model includes advanced crossover technology, providing seamless transitions between frequencies. The IW-4 boasts integrated back boxes that improve sound isolation and reduce distortion, enhancing overall performance.

Lastly, the IW-5 model is the flagship of the series, engineered for ultimate audio fidelity. This speaker features dual 8-inch woofers and high-performance tweeters, enabling it to deliver deep and powerful bass alongside crystal-clear highs. The IW-5 utilizes the latest sound dispersion technology, allowing for expansive sound coverage throughout larger spaces.

In summary, the Sonance IW series, including the IW-1, IW-2, IW-3, IW-4, and IW-5, offers a range of powerful in-wall speaker options tailored to diverse audio needs. With features like adjustable tuning systems, advanced crossover technology, and high-quality drivers, these speakers stand at the forefront of modern home audio solutions, ensuring that every listener enjoys a rich and immersive sound experience. Whether it’s for casual listening or creating an elaborate home theater, Sonance provides an exceptional choice for anyone looking to elevate their audio experience.
Top Page Image Contents