Cat5/RJ-45 Cable Wiring

3a. If the system includes a #70071 or #70072 line- level volume control, set the iPort’s Volume Control YES/NO switch to the right (YES) position (volume control in system).

3b. Use 5-conductor twin-shielded wire to connect the volume control to the iPort 5-pin connector block. To avoid noise, connect the wires as shown in Figure 3.

The volume control connector pin assignments are:

Pin 1: R ch line-level audio from volume control to iPort

Pin 2: L ch line-level audio from volume control to iPort

Pin 3: Ground

Pin 4: R ch line-level audio from iPort to volume control

Pin 5: L ch line-level audio from iPort to volume control

Note: Do not use Cat5 wire to make these connections. This wire carries high-imped- ance unbalanced line-level audio and must be twin-shielded to avoid noise. Two stan- dard stereo RCA audio cables with the ends removed will also work for this application.

4.Plug the RJ-45 connectors into the Audio jack on the iPort and the RJ-45 jack on the Wallplate.

5.Install the Unbalanced Audio Wallplate in an electrical box in the room where the audio equipment is located.

Important: Do not install the iPort Wallplate in the same electrical box as AC house wiring, a light switch or any other high-voltage device or control. The Wallplate can share gang boxes with other iPort Wallplates or with controls such as A/B speaker switches, infrared receivers and vol- ume controls, if these other devices are rated as Class 2 devices according to the National Electrical Code.

6.Plug the included 15V DC power supply into the Power connector on the iPort Wallplate.

All RJ-45 cables used in iPort installations must be wired according to the T568A (“Straight-Through”) Standard, with cables wired identically at both ends.

To prepare Cat5/RJ-45 cables for iPort installations:

1.Pull the Cat5 wire through the wall between the desired locations.

2.Use a stripper or knife to strip about 1” of the cable jacket off each end of the wire.

•Be careful not to nick any of the individual wires.

3.Untwist the wire

pairs and spread

them flat. Arrange them as shown in the dia- gram.

4. Trim the ends of

the individual wires to ½” in length, making

sure that they are even with each

other. Flatten the

wires against each other, leaving no space between them.

5.Hold the RJ-45 connector clip side-down and insert the Cat5 wire ends firmly into the connector. Make sure that all the wires are flat all the way to the very front of the con- nector.

6.Re-confirm that the color orientation matches the diagram and that cable jacket fits against the connector stop.

7.Firmly crimp the RJ-45 connector with the crimp tool. Confirm that the connector is crimped firmly and that all the wires are flat right up against the front of the connec- tor. If even one of these wires is incorrect, cut the connec- tor off the cable and repeat steps 2 – 7 with a new RJ-45 connector.

iPor t ver. IW

Instruction Manual

IW-5, IW-2, IW-4, IW-1, IW-3 specifications

Sonance is renowned for its commitment to delivering high-fidelity audio solutions that seamlessly blend into any living space. Among its impressive lineup of in-wall speakers, the IW series stands out, particularly the IW-1, IW-2, IW-3, IW-4, and IW-5 models. Each speaker is designed to enhance home audio experiences while maintaining a discreet aesthetic.

The Sonance IW-1 is a compact in-wall speaker that prioritizes versatility. It features a 1-inch tweeter and a 5.25-inch mid/bass driver, which deliver crisp highs and robust mid-range frequencies. This model is particularly suitable for small to medium-sized rooms. The integration of Sonance's patented technology allows for easy installation and an impressive soundstage, ensuring that it doesn't compromise on performance despite its smaller size.

Moving to the IW-2, this model steps up with a larger 6.5-inch mid/bass driver, coupled with a 1-inch tweeter. This design provides enhanced low-frequency response, making it ideal for home theater systems. The IW-2 incorporates a unique tuning system that allows users to adjust the audio output to suit their specific environment, providing a tailored listening experience.

The IW-3 is designed for those who crave a more powerful output. Featuring dual 6.5-inch woofers and a 1-inch tweeter, the IW-3 ensures rich, cinematic audio quality and impressive bass response. Its robust build and quality materials contribute to its durability, making it an excellent choice for both residential and commercial spaces.

For audiophiles looking for an exceptional sound experience, the IW-4 offers even more sophistication. This model includes advanced crossover technology, providing seamless transitions between frequencies. The IW-4 boasts integrated back boxes that improve sound isolation and reduce distortion, enhancing overall performance.

Lastly, the IW-5 model is the flagship of the series, engineered for ultimate audio fidelity. This speaker features dual 8-inch woofers and high-performance tweeters, enabling it to deliver deep and powerful bass alongside crystal-clear highs. The IW-5 utilizes the latest sound dispersion technology, allowing for expansive sound coverage throughout larger spaces.

In summary, the Sonance IW series, including the IW-1, IW-2, IW-3, IW-4, and IW-5, offers a range of powerful in-wall speaker options tailored to diverse audio needs. With features like adjustable tuning systems, advanced crossover technology, and high-quality drivers, these speakers stand at the forefront of modern home audio solutions, ensuring that every listener enjoys a rich and immersive sound experience. Whether it’s for casual listening or creating an elaborate home theater, Sonance provides an exceptional choice for anyone looking to elevate their audio experience.