2Wire ND-7609-3UK instruction manual From Micro-SD Card, Starting the Software, Opening an image

#ThermalVision™ PRO SW

2.2.From Micro-SD Card

a)Take the micro-SD card out of the camera and insert into a suitable card reader.

b)Connect the card reader to the PC.

c)Use Windows Explorer to locate the files with the images on the micro-SD card and copy the complete folders on to the PC. Note that there are at least two files for each image, which must be kept together.

3. Using the ThermalVision™ PRO series software.

The PC software has two main parts.

1.Analysis Mode – Allows the user to analyse the image and also alter the settings for how the image is displayed.

2.Report Writer Mode - Allows the user to create a report of the thermal images for records and administration and operational use.

3.1. Starting the Software.

Double Click on the ThermalVision™ PRO series icon to start the software . The following window will appear.

Note it may be necessary to maximise the window.

3.2. Opening an image.

Click on the drop down File menu and click on “Open”.

Use the Windows Explorer to locate the folder where the images are saved. If viewing images directly from the camera this will be shown as a removable disk.

Once the folder is located, double click on the image to be loaded.

ND-7609-3UK Page 4 of 21