Specification S | Sonance K2 guide

N A V I G A T O R K 2

S P E C I F I C A T I O N S

Navigator K2 In-wall Keypad

Use the Sonance Navigator Harbor and the Sonamp® 1230, or Sonamp 1250MKII

for seamless integration with the Navigator K2.

Navigator K2 In-wall keypad with LCD touch screen

High contrast, high viewing angle 64 x 128 pixel, black & white LCD touch screen with white LED backlighting

• Six interchangeable hard source buttons

• Built-in IR receiver

• One IR Output (200mA)

• One half-duplex RS485 port

(RJ-45 connection for future

upgradability, not active at this time).

• One power sense input

• One speaker relay trigger output

• One speaker relay status input

• One keypad sync I/O port for keeping

multiple keypads synchronized to the

same page/source

• K2 Program Manager intuitive & robust

PC software for programming and

configuration

• Includes toggles, programming cable,

and white bezel (Additional faceplates in

Black, Ivory, and Almond colors sold

Navigator Harbor Multi-Zone A/V Controller

•Inputs: Audio – 6 gold RCA, 6 looping jacks 47k; Video-6 gold RCA, 6 buffered looping jacks 75Ohms; IR/Keypad- 5 position removable connector; Paging-3.5mm mono mini-plug with variable level control; OPTO isolated 5-24VDC trigger Input

•Outputs: Audio-6 stereo RCA 600Ohms; Video-6 composite RCA 75Ohms; 6 com mon IR, 6 zone, 1 linking (3.5mm mono mini-plug for all IR outputs)

•Frequency Response: 20Hz-20kHz +/-0.5dB

•Input Dynamic Range: 90dB

•Volume Control Range: 68dB

•THD: Less than 0.02% 20Hz-20kHz

•Signal to Noise Ration: less than -98dB (A weighted)

•Preamp Gain: +12dB at maximum volume

•Maximum Signal Output: 9V RMS into 10kOhms load

•Dimensions (W x H x D): 16-3⁄4” x 5-5/8” x 12-5/8” (425mm x 143mm x 321mm)

•Weight: 20 lbs (9 kg)

•Also available in rack mount version

Sonamp 1230

12 Channel Amplifier

•All Channels Driven Power Output: 30 Watts per channel @ 8Ohms; 45 Watts per channel @ 4Ohms

•Total Harmonic Distortion: 0.03% 20Hz- 20kHz @ 8Ohms; 0.10% 20Hz-20kHz @ 4Ohms (45 WRMS)

•I.M. Distortion (SMPTE 4:1) @ 8Ohms: 0.01% @ 30 Watts

•Signal to Noise Ratio: -100dB below rated output (A-weighted)

•Input Sensitivity: 700 millivolt for 30 watts RMS @ 8Ohms

•Input Impedance: 20kOhms

•Power Consumption: 1400 Watts, maximum 4Ohms full power

•Fuse: 10A AG

•Dimensions (W x H x D): 16-3/4" x 5-5/8" x 14-1/4" (425mm x 143mm x 362mm)

•Weight: 38 lbs (17 kg)

•Also available in rack mount version

Sonamp 1250MKII

12 Channel Amplifier

•All Channels Driven Power Output: 50 Watts per ch x 12 @ 8 Ohms; 75 Watts per ch x 12 @ 4 Ohms; 100 Watts per ch x 6 @ 8 Ohms bridged.

•Dynamic Headroom: +1.9dB x 12 @ 8 Ohms; +1.8dB x 12 @ 4 Ohms; +3.5dB x 6

@8 Ohms bridged

•Total Harmonic Distortion: 0.03% 20Hz- 20kHz @ 8 Ohms, 50 Watts; 0.06% 20Hz- 20kHz @ 4 Ohms, 75 Watts; THD less than 0.01% @ 1 kHz 4 Ohms, 75 Watts

•I.M. Distortion (SMPTE 4:1) @ 8 Ohms: 0.01% @ 50 Watts, 8 Ohms

•Signal to Noise Ratio: -100dB below rated output (A-weighted)

•Input Sensitivity: 700 millivolts for 50 Watts RMS @ 8 Ohms

•Input Impedance: 20kOhms

•Power Consumption: 1800 Watts maximum

@4 Ohms, full power; 10 Watts standby

•Fuse: 15A MDA, 250V

•Dimensions (W x H x D): 16-3/4" x 9-1/2" x 16-1/2" (425mm x 243mm x 420mm)

•Weight: 55 lbs (25 kg)

•Also available in rack mount version

separately).

• Overall Dimensions (W x H x D): 4.5” x

4.5” x 1.83” (114mm x 114mm x 46.5mm)

• In-wall Dimensions (W x H x D): 3.66” x

3.23” x 1.83” (93mm x 82mm x 46.5mm)

Additional wall plate colors are also available in: Almond, Black, and Ivory!

Navigator Harbor

Sonamp 1230

Sonance Navigator K2 system hook up diagram for a sample whole house system!

SONANCE • 212 AVENIDA FABRICANTE • SAN CLEMENTE, CA 92672-7531 • TEL: 800-582-7777 • 949-492-7777 • FAX: 800-538-5151 • 949-361-5151

ALL SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

TAKE THE TOUR AT WWW.SONANCE.COM