Vita-Mix High-Performance Commercial Blenders Top four problems you can fix on your own

Page 9

Top four problems you can fix on your own

1. Problem:

Solution #1:

• increased vibration

Check blade assembly for loose, damaged

• leaking from bottom of container

or nicked components and replace.

• increased container noise

Solution #2:

 

Tighten retainer nut with screwdriver

 

moving clockwise until it is snug. See p. 10.

 

 

2. Problem:

Solution #1:

• Machine will not run.

Double-check to make sure power cord is

 

firmly in power outlet.

 

Solution #2:

 

Check to make sure switches are clean

 

and moving freely.

 

Solution #3:

 

The thermal protector may have turned the

 

machine off. Turn power off for up to 30

 

minutes to reset. Note: Cooling may be

 

quickened by placing the motor base in a

 

refrigerator or cool spot. (Unplug first). To

 

speed up the cooling process, try circulat-

 

ing the air with a fan or vacuum at the bot-

 

tom of the motor base.

 

 

3. Problem:

Solution:

• loud noise from blade area

Drive Socket may be broken. Check for a

• blades don’t spin

fine crack down the center or worn teeth-

 

replace with a new drive socket. (Item #

 

802). Instructions are included with part.

 

 

4. Problem:

Solution:

• Bar Boss/Timer Blender will not run

Check ON/OFF switch to make sure the

when START TIMER switch is

switch is in the ON position. Note: START

activated.

TIMER switch is lit when power is on.

 

 

On Two-Step Timers:

Timer stops working if machine is overloaded on low speed. Reset by turning power off for 15 seconds. Do not turn power off midway through a blending cycle. To interrupt cycle, press START/STOP TIMER switch one time. See page 9.

If you cannot fix your machine with these suggestions, technical help is available by calling 800-4DRINK4 (800-437-4654). If you live outside the USA, contact your local Vita-Mix distributor.

Dimensions:

Height of Motor Base: 8-1/2” (21.25 cm)

with 64 oz (2 liter) Polycarbonate container and lid: 20” (50 cm)

with 64 oz (2 liter) Polycarbonate container without lid: 18” (45 cm)

with 48 oz (1.4 liter) Polycarbonate container and lid: 17-1/2” (46.75 cm)

with 48 oz (1.4 liter) Polycarbonate container without lid: 9-1/4” (44.75 cm) 64 oz (2 liter) Polycarbonate Container with lid, no base: 12-3/4” (32 cm)

48 oz (1.4 liter) Polycarbonate Container with lid, no base: 10” (25.5 cm)

Dimensions: 8” W x 9” D x 20” H (20.3 cm x 22.9 cm x 51 cm)

Ship weight of machine: 13 lbs. (6 kg)

Power Requirements:

Volts:

120 VAC

Volts: 220/240 VAC

Volts: 100 VAC

Amps:

11.5

Watts: 750-850

Watts: 900

Hz: 50/60

Hz: 50/60

Hz: 50/60

The instructions appearing in this Owner’s Manual cannot cover every possible condition and situation that may occur. Common sense and caution must be practiced when operating and maintaining any appliance.

16

17

Image 9
Contents Bar Boss,TM Drink Machine Vita-Prep& Vita-Pro Always operate the Vita-Mix blender with a lid in place Do not use outdoorsTwo-Step Timer Model 20 or 45 Second Timer ModelBar Boss Timer Model Two-Speed ModelPiece Lid Two-Part Lid48 oz .4 liter Polycarbonate stackable container B1 Unsealed/unlatched B2 SealedTurn off the motor Bar BossTM and Timer Blender InstructionsRetainer Nut Removal When processing hot liquids alwaysBar Boss,TM Drink Machine Vita-Proand Vita-PrepItem # Part Motor Base Care NoteLid ContainerTop four problems you can fix on your own DimensionsPower Requirements Page Usher Road, Cleveland, Ohio 44138-2103 USA Foodservice Division