3.1.2 Mounting the NextMove ST
CAUTION: Before touching the unit be sure to discharge static electricity from your body and clothing by touching a grounded metal surface. Alternatively, wear an earth strap while handling the unit.
Ensure you have read and understood the location requirements in section 3.1.1. Mount the NextMove ST by the four slots in the metal carrier/heatsink assembly. M5 bolts or screws are recommended.
Slot detail
6.5 (0.26)
6 (0.24)
140(5.51)
All dimensions shown as
mm(inches)
53(2.09)
213 (8.39) | 263 (10.35) |
127(5.00)
Figure 1 - Package dimensions
There must be at least 20mm clearance between the NextMove ST and neighboring equipment to allow sufficient cooling by natural convection. Remember to allow additional space around the edges to accommodate the mating connectors and associated wiring leading to the NextMove ST.
MN1921 |
